USB2SPI

sOrzada·STASIS_Exposure_Hardware·Control System/KiCAD_PCBs/USB2SPI/USB2SPI.kicad_pcb

USB2SPI PCB layout, top view — open source board by sOrzada

About the USB2SPI PCB

USB2SPI is an open source PCB design by sOrzada, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 160 × 100 mm, with 12 components from 10 distinct parts.

Other key parts include the 74LVC1G14DCK and UMFT4222EV. By type, the board carries 4 capacitors, 2 ICs, 2 resistors, 1 connector and 1 jumper.

From the project

This is the repository for the exposition hardware of the STASIS project.

This Folder contains the PCBs and Housings for the Control System of the STASIS project's RF exposition system. The PCBs are provided in two different formats: Eagle and KiCAD. The Housings-folder contains .step files for the housings and front panels of the Eurocards.

Main components on the USB2SPI

74LVC1G14DCKUMFT4222EV

USB2SPI bill of materials (BOM)

12 components, 10 distinct parts.

QtyPartRefs
1
74LVC1G14DCK
IC1
1
UMFT4222EV
U$1
1
BUS
J1
1
SPI_RESET
JP1
1
PB1
PAD1
1
PB2
PAD2
1
10nF
C1
3
100nF
C2, C3, C4
1
50k
R1
1
100k
R2

USB2SPI design files

The KiCad project lives in the sOrzada/STASIS_Exposure_Hardware repository on GitHub; these links point at the commit this page was built from.

USB2SPI: common questions

How big is the USB2SPI PCB?

The USB2SPI measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB2SPI?

12 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the USB2SPI design files?

From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USB2SPI design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which sOrzada chose for the repository.

More boards in STASIS_Exposure_Hardware