TR UBL Splitter V1p1
sOrzada·STASIS_Exposure_Hardware·Control System/KiCAD_PCBs/TR_UBL_Splitter/TR_UBL_Splitter_V1p1.kicad_pcb
About the TR UBL Splitter V1p1 PCB
TR UBL Splitter V1p1 is an open source PCB design by sOrzada, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 160 × 100 mm, with 9 components from 6 distinct parts.
Other key parts include the MM74HCT04MX and SMA_CON-H. By type, the board carries 5 ICs, 1 connector, 1 LED, 1 capacitor and 1 resistor.
From the project
This is the repository for the exposition hardware of the STASIS project.
This Folder contains the PCBs and Housings for the Control System of the STASIS project's RF exposition system. The PCBs are provided in two different formats: Eagle and KiCAD. The Housings-folder contains .step files for the housings and front panels of the Eurocards.
Main components on the TR UBL Splitter V1p1
TR UBL Splitter V1p1 bill of materials (BOM)
9 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MM74HCT04MX | SO14_88 | IC1 |
| 4 | SMA_CON-H | BU-SMA-H | U$1, U$2, U$3, U$4 |
| 1 | BUS | VG64P_79 | J1 |
| 1 | RED | LED3MM_259 | LED1 |
| 1 | 100nF | C0603_334 | C1 |
| 1 | 330 | R0603_334 | R1 |
TR UBL Splitter V1p1 design files
The KiCad project lives in the sOrzada/STASIS_Exposure_Hardware repository on GitHub; these links point at the commit this page was built from.
TR UBL Splitter V1p1: common questions
How big is the TR UBL Splitter V1p1 PCB?
The TR UBL Splitter V1p1 measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TR UBL Splitter V1p1?
9 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the TR UBL Splitter V1p1 design files?
From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TR UBL Splitter V1p1 design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which sOrzada chose for the repository.
More boards in STASIS_Exposure_Hardware
Modulator V1p2
sOrzada
160 × 100 mm112 parts6LCERN-OHL-W-2.00Timing Control V1p1
sOrzada
160 × 100 mm101 parts6LCERN-OHL-W-2.00Stripline
sOrzada
450 × 100 mm81 parts2LCERN-OHL-W-2.00Backplane
sOrzada
376 × 128.6 mm75 parts2LCERN-OHL-W-2.00Signal source V1p0
sOrzada
160 × 100 mm63 parts2LCERN-OHL-W-2.00SPI2Parallel v1p1
sOrzada
160 × 100 mm63 parts4LCERN-OHL-W-2.00Power Distribution V1.1
sOrzada
165 × 85 mm61 parts2LCERN-OHL-W-2.00VoltageControl V1p1
sOrzada
150 × 90 mm55 parts2LCERN-OHL-W-2.00HPA Module V1p1
sOrzada
160 × 100 mm52 parts2LCERN-OHL-W-2.00RF Splitter active
sOrzada
160 × 100 mm19 parts2LCERN-OHL-W-2.00USB2SPI
sOrzada
160 × 100 mm12 parts2LCERN-OHL-W-2.00