SPI2Parallel v1p1

sOrzada·STASIS_Exposure_Hardware·Control System/KiCAD_PCBs/SPI2Parallel/SPI2Parallel_v1p1.kicad_pcb

SPI2Parallel v1p1 PCB layout, top view — open source board by sOrzada

About the SPI2Parallel v1p1 PCB

SPI2Parallel v1p1 is an open source PCB design by sOrzada, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 160 × 100 mm, with 63 components from 24 distinct parts.

Other key parts include the SN74LV595ANSR, 74LVC1G14DCK, 74LVC1G04DCK, SN74LV393ANSR and SN74LVC1G32DCKRE4. By type, the board carries 25 ICs, 24 capacitors, 9 resistors, 1 connector, 1 jumper and 1 LED.

From the project

This is the repository for the exposition hardware of the STASIS project.

This Folder contains the PCBs and Housings for the Control System of the STASIS project's RF exposition system. The PCBs are provided in two different formats: Eagle and KiCAD. The Housings-folder contains .step files for the housings and front panels of the Eurocards.

Main components on the SPI2Parallel v1p1

SN74LV595ANSR74LVC1G14DCK74LVC1G04DCKSN74LV393ANSRSN74LVC1G32DCKRE474LVC1G17DCK74LVC1G08DCK74LVCH16244ADGG-QJDS1100LZ-20LZAZ1117IH-3.3TRG1

SPI2Parallel v1p1 bill of materials (BOM)

63 components, 24 distinct parts.

QtyPartRefs
4
SN74LV595ANSR
IC1, IC2, IC3, IC4
1
74LVC1G14DCK
IC5
4
74LVC1G04DCK
IC6, IC8, IC16, IC23
1
SN74LV393ANSR
IC7
5
SN74LVC1G32DCKRE4
IC9, IC10, IC12, IC13, IC21
3
74LVC1G17DCK
IC11, IC15, IC20
2
74LVC1G08DCK
IC14, IC22
2
74LVCH16244ADGG-QJ
IC17, IC18
1
74LVC1G17DCK
IC19
1
DS1100LZ-20LZ
U$5
1
AZ1117IH-3.3TRG1
U$9
1
System Bus
J1
1
PINHD-2X4
JP1
1
Inp
PAD1
1
3.3V
PAD2
1
10mA 2.2-2.4V
LED1
22
10nF
C1, C2, C3, C4, C5, C6, C7, C8 +14
1
10µF
C13
1
22µF
C14
1
1k
R1
Show 4 more
QtyPartRefs
5
100k
R2, R3, R5, R6, R9
1
1.8k
R4
1
120
R7
1
220k
R8

SPI2Parallel v1p1 design files

The KiCad project lives in the sOrzada/STASIS_Exposure_Hardware repository on GitHub; these links point at the commit this page was built from.

SPI2Parallel v1p1: common questions

How big is the SPI2Parallel v1p1 PCB?

The SPI2Parallel v1p1 measures 160 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SPI2Parallel v1p1?

63 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the SPI2Parallel v1p1 design files?

From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SPI2Parallel v1p1 design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which sOrzada chose for the repository.

More boards in STASIS_Exposure_Hardware