SpriteSAMD

spacecraft-design-lab-2019·avionics-motherboard·BAK/spriteSAMD.kicad_pcb

SpriteSAMD PCB layout, top view — open source Microchip SAM board by spacecraft-design-lab-2019

About the SpriteSAMD PCB

SpriteSAMD is an open source Microchip SAM PCB design by spacecraft-design-lab-2019, published on GitHub. It is a 2-layer board measuring 35 × 35 mm, with 35 components from 22 distinct parts.

Its main chip is the ATSAMD51G_TQFN48, from the Microchip SAM family. Other key parts include the BMX160, RFM95W-915S2, DRV8833PWP, TPS82740BSIPR and MAX708RESA-T. By type, the board carries 9 connectors, 8 ICs, 8 capacitors, 4 resistors, 2 crystals and 2 diodes.

From the project

Main flight computer board for the PyCubed-1 spacecraft

Main components on the SpriteSAMD

SpriteSAMD bill of materials (BOM)

35 components, 22 distinct parts.

QtyPartRefs
1
BMX160
IC1
2
RFM95W-915S2
U1, U8
1
ATSAMD51G_TQFN48
U2
2
DRV8833PWP
U3, U5
1
TPS82740BSIPR
U4
1
MAX708RESA-T
U6
2
ANTENNA_U.FL
X1, X2
4
Conn_01x01
J1, J28, J29, J30
1
10118194-0001LF
J2
1
Micro_SD_Card
J3
1
xf2m-2415-1a
J4
1
XF2M-1015-1A
J5
1
Conn_01x02
J6
1
KMR231NG LFS
SW1
1
GREEN
D1
1
RB550V
D2
1
10uH
L1
3
0.1uF
C1, C4, C8
2
10uF
C2, C7
3
1uF
C3, C5, C6
Show 2 more
QtyPartRefs
1
330
R1
3
10K
R2, R3, R5

SpriteSAMD design files

The KiCad project lives in the spacecraft-design-lab-2019/avionics-motherboard repository on GitHub; these links point at the commit this page was built from.

SpriteSAMD: common questions

What microcontroller does the SpriteSAMD use?

The SpriteSAMD is built around the ATSAMD51G_TQFN48, from the Microchip SAM family.

How big is the SpriteSAMD PCB?

The SpriteSAMD measures 35 × 35 mm, has 2 copper layers and is 1.2 mm thick.

How many components are on the SpriteSAMD?

35 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the SpriteSAMD design files?

From the spacecraft-design-lab-2019/avionics-motherboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SpriteSAMD design in my own project?

The repository has no license, so all rights stay with spacecraft-design-lab-2019. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SpriteSAMD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in avionics-motherboard

Similar boards