8 open source boards using the BMX160

Real designs built with the BMX160, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the BMX160

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the BMX160 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 5 has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
  • Pin 8 has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
  • Pin 2 is tied to GND on 7 of 7 designs.
  • Pin 3 is tied to GND on 7 of 7 designs.
Pin 1Connected to: Signal 71%
  • Resistor to GND on 43% · 10 kΩ (3)
Pin 2Connected to: GND 100%
Pin 3Connected to: GND 100%
Pin 4Connected to: Not connected 71% · a signal 29%
Pin 5Connected to: 3.3V 86%
  • Decoupling capacitor on 100% · 100 nF (19), 10 µF (1), 100 µF (1)
Pin 6Connected to: GND 100%
Pin 7Connected to: GND 100%
Pin 8Connected to: 3.3V 86%
  • Decoupling capacitor on 100% · 100 nF (16), 10 µF (1), 100 µF (1)
Pin 9Connected to: Not connected 86%
Pin 10Connected to: Not connected 100%
Pin 11Connected to: Not connected 100%
Pin 12Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 71% · 100 nF (12)
Pin 13Connected to: The microcontroller 29%
  • Pull-up to 3.3V on 71% · 10 kΩ (4), 2.2 kΩ (1)
  • Series resistor on 43% · 200 kΩ (3), 0 Ω (3)
Pin 14Connected to: The microcontroller 29%
  • Pull-up to 3.3V on 71% · 10 kΩ (4), 2.2 kΩ (1)
  • Series resistor on 43% · 200 kΩ (3), 0 Ω (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by pycubed, Crazyflie control board by sPyOpenSource, Mainboard by alxklso and AAQuad-Evolution by Fberbari.

The BMX160 in open source designs

The gallery holds 8 open source boards using the BMX160 from 7 GitHub repositories; a typical one measures about 50 × 59.4 mm and carries around 81 components.

75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Mainboard by pycubed.

Microcontrollers on boards using the BMX160

BMX160: common questions

Where can I find a BMX160 reference design?

Each of the 8 boards on this page is a real design using the BMX160. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BMX160 pin 5?

Pin 5 has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the BMX160.

What decoupling capacitors do designs use on the BMX160 pin 8?

Pin 8 has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the BMX160.

How is the BMX160 pin 2 connected?

Pin 2 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the BMX160.

What parts are used alongside the BMX160?

The ADM1176-1ARMZ-R7, ATSAMD51J19A-AU, BQ25883RGER, MAX706RESA and RFM98PW appear in the most repositories here.

Which microcontrollers do boards using the BMX160 use?

Most are built on Microchip SAM (5), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the BMX160?

The median is 50 × 59.4 mm, and 75% are two-layer designs.

What is the most popular open source board using the BMX160?

By GitHub stars, Mainboard by pycubed, with 97 stars.

Can I simulate one of these boards using the BMX160 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part