Laserdinges
SpeedRoom·Laserkaart·PCB_Laserdinges/Laserdinges.kicad_pcb
About the Laserdinges PCB
Laserdinges is an open source ESP32 PCB design by SpeedRoom, published on GitHub. It is a 2-layer board measuring 60.6 × 49.9 mm, with 30 components from 13 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3 and MP1584. By type, the board carries 11 resistors, 6 switches, 5 ICs, 4 capacitors, 2 connectors and 2 diodes.
From the project
Code voor de ESP32 van het laserpaneel staat in Laserdinges.
Code voor de ESP32 van het laserpaneel staat in Laserdinges.
Code voor de ESP32's die de moteren besturen staat in Motordinges. Deze code is het zelfde voor alle 3 de ESP32's
Main components on the Laserdinges
Laserdinges bill of materials (BOM)
30 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | ~ | PinHeader_1x05_P2.54mm_Vertical | U3 |
| 1 | MP1584 | U1584 | U4 |
| 1 | ~ | PinHeader_1x02_P2.54mm_Vertical | U5 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Barrel_Jack | BarrelJack_GCT_DCJ200-10-A_Horizontal | J2 |
| 2 | SW_Push | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1, SW2 |
| 1 | SW_SPST | PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 3 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | SW4, SW5, SW6 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 4 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 11 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +3 |
Laserdinges design files
The KiCad project lives in the SpeedRoom/Laserkaart repository on GitHub; these links point at the commit this page was built from.
Laserdinges: common questions
What microcontroller does the Laserdinges use?
The Laserdinges is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Laserdinges PCB?
The Laserdinges measures 60.6 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Laserdinges?
30 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Laserdinges design files?
From the SpeedRoom/Laserkaart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Laserdinges design in my own project?
The repository has no license, so all rights stay with SpeedRoom. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Laserdinges without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Laserkaart
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k