Motordinges

SpeedRoom·Laserkaart·PCB_Motordinges/Motordinges.kicad_pcb

Motordinges PCB layout, top view — open source ESP32 board by SpeedRoom

About the Motordinges PCB

Motordinges is an open source ESP32 PCB design by SpeedRoom, published on GitHub. It is a 2-layer board measuring 65.6 × 42.9 mm, with 22 components from 16 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the MP1584 and AMS1117-3.3. By type, the board carries 7 resistors, 4 capacitors, 3 ICs, 2 connectors, 2 switches and 2 diodes.

From the project

Code voor de ESP32 van het laserpaneel staat in Laserdinges.

Code voor de ESP32 van het laserpaneel staat in Laserdinges.

Code voor de ESP32's die de moteren besturen staat in Motordinges. Deze code is het zelfde voor alle 3 de ESP32's

Main components on the Motordinges

Motordinges bill of materials (BOM)

22 components, 16 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
MP1584
U2
1
AMS1117-3.3
U3
1
Conn_01x04_Pin
J1
1
Barrel_Jack
J2
1
Conn_01x02_Pin
Motor1
1
Conn_01x02_Pin
Motor2
1
EN
SW1
1
FLASH
SW2
1
BLUE
D1
1
PWR
D2
1
100uF/6.3V
C1
2
10uF
C2, C4
1
100nF
C3
5
10K
R1, R2, R3, R5, R6
2
1K
R4, R7

Motordinges design files

The KiCad project lives in the SpeedRoom/Laserkaart repository on GitHub; these links point at the commit this page was built from.

Motordinges: common questions

What microcontroller does the Motordinges use?

The Motordinges is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Motordinges PCB?

The Motordinges measures 65.6 × 42.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Motordinges?

22 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Motordinges design files?

From the SpeedRoom/Laserkaart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Motordinges design in my own project?

The repository has no license, so all rights stay with SpeedRoom. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Motordinges without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Laserkaart

Similar boards