FEATHER-SAO

sphereinabox·2024-SAO-Shims·FEATHER-SAO/FEATHER-SAO.kicad_pcb

FEATHER-SAO PCB layout, top view — open source board by sphereinabox

About the FEATHER-SAO PCB

FEATHER-SAO is an open source PCB design by sphereinabox, published on GitHub. It is a 2-layer board measuring 33 × 50.2 mm, with 6 components from 6 distinct parts.

Other key parts include the Adafruit_Feather_Generic. By type, the board carries 3 connectors, 1 module, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This SAO (SuperCon Add-On) was made to let me put an Adafruit feather board, like the Hallowing M0 or EdgeBadge or PyBadge handed out at previous supercon onto the badge as an SAO.

This SAO (SuperCon Add-On) was made to let me put an Adafruit feather board, like the Hallowing M0 or EdgeBadge or PyBadge handed out at previous supercon onto the badge as an SAO.

There's a swith at the bottom to connect the 3.3v pin to the feather to the 3.3v on on the SAO connector. Turn it off if you're connecting USB or your own battery, and turn it on to power your feather device from the badge's SAO connector.

FEATHER-SAO, from the project README
From the project README

Main components on the FEATHER-SAO

FEATHER-SAO bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
Adafruit_Feather_Generic
A1
1
Simple_Addon_v2
X1
1
Conn_01x12_Pin
J1
1
Conn_01x16_Pin
J2
1
Conn_01x06_Pin
J3
1
SW_SPDT
SW1

FEATHER-SAO design files

The KiCad project lives in the sphereinabox/2024-SAO-Shims repository on GitHub; these links point at the commit this page was built from.

FEATHER-SAO: common questions

How big is the FEATHER-SAO PCB?

The FEATHER-SAO measures 33 × 50.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FEATHER-SAO?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the FEATHER-SAO design files?

From the sphereinabox/2024-SAO-Shims repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FEATHER-SAO design in my own project?

The repository has no license, so all rights stay with sphereinabox. Use it as a reference, and ask the author before reusing the design.

More boards in 2024-SAO-Shims

Similar boards