SAO-RP2040-SHIM

sphereinabox·2024-SAO-Shims·SAO-RP2040-SHIM/SAO-RP2040-SHIM.kicad_pcb

SAO-RP2040-SHIM PCB layout, top view — open source RP2040/RP2350 board by sphereinabox

About the SAO-RP2040-SHIM PCB

SAO-RP2040-SHIM is an open source RP2040/RP2350 PCB design by sphereinabox, published on GitHub. It is a 2-layer board measuring 29.2 × 50 mm, with 7 components from 6 distinct parts.

Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. By type, the board carries 6 connectors and 1 IC.

From the project

This SAO (SuperCon Add-On) shim goes between your badge and your SAO to break out the SAO pins, and shuffle or disconnect them if needed

This SAO (SuperCon Add-On) shim goes between your badge and your SAO to break out the SAO pins, and shuffle or disconnect them if needed

But it also connects an RP2040-Zero, to use with the pulseview from the open source sigrok project and the sigrok-rp2040 pi pico firmware see https://github.com/pico-coder/sigrok-pico/ and https://github.com/pico-coder/sigrok-pico/blob/main/AnalyzerDetails.md

SAO-RP2040-SHIM, from the project README
From the project README

Main components on the SAO-RP2040-SHIM

SAO-RP2040-SHIM bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
RP2040-Zero
U1
1
to SAO
J1
1
to BADGE
J2
1
Conn_01x06_Pin
J3
2
Conn_01x09_Pin
J4, J5
1
Conn_01x05_Pin
J6

SAO-RP2040-SHIM design files

The KiCad project lives in the sphereinabox/2024-SAO-Shims repository on GitHub; these links point at the commit this page was built from.

SAO-RP2040-SHIM: common questions

What microcontroller does the SAO-RP2040-SHIM use?

The SAO-RP2040-SHIM is built around the RP2040-Zero, from the RP2040/RP2350 family.

How big is the SAO-RP2040-SHIM PCB?

The SAO-RP2040-SHIM measures 29.2 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SAO-RP2040-SHIM?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the SAO-RP2040-SHIM design files?

From the sphereinabox/2024-SAO-Shims repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SAO-RP2040-SHIM design in my own project?

The repository has no license, so all rights stay with sphereinabox. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SAO-RP2040-SHIM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in 2024-SAO-Shims

Similar boards