Nuclone small MCP355X
About the Nuclone small MCP355X PCB
Nuclone small MCP355X is an open source PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 81 components from 58 distinct parts.
Other key parts include the MCP355X and reference_sot23-3. By type, the board carries 35 test points, 14 connectors, 12 resistors, 8 capacitors, 6 diodes and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Various development boards/test for microcontrollers, check for breakouts here
Main components on the Nuclone small MCP355X
Nuclone small MCP355X bill of materials (BOM)
81 components, 58 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP355X | SOIC-8 | U1 |
| 1 | reference_sot23-3 | SOT23-3 | U2 |
| 4 | Conn_01x04 | Header-0254-1X04-H010 | J1, J2, J7, J8 |
| 1 | nuclone_small_left | nuclone_small_left_stacked | J3 |
| 1 | nuclone_small_right | nuclone_small_right_stacked | J4 |
| 1 | DevBoardUartInput | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6 |
| 4 | Conn_01x04 | Header-0254-1X02-H010 | J9, J10, J11, J12 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13 |
| 1 | Conn_02x03_Odd_Even | Header-0254-2X03-H010 | J15 |
| 1 | Conn_02x04_Odd_Even | Header-0254-2X04-H010 | J16 |
| 1 | 0.5A | F_0603_hand | F1 |
| 1 | V20231213 | Label_Generic | N2 |
| 1 | JLCJLCJLCJLC | Label_Generic | N3 |
| 1 | VDD1 | TestPoint_hole_H05R10_2side | TP1 |
| 1 | VBUS | TestPoint_hole_H05R10_2side | TP2 |
| 2 | VSS | TestPoint_hole_H05R10_2side | TP3, TP19 |
| 1 | P00 | TestPoint_hole_H05R10_2side | TP4 |
| 1 | P01 | TestPoint_hole_H05R10_2side | TP5 |
| 1 | P02 | TestPoint_hole_H05R10_2side | TP6 |
| 1 | P03 | TestPoint_hole_H05R10_2side | TP7 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | P04 | TestPoint_hole_H05R10_2side | TP8 |
| 1 | P05 | TestPoint_hole_H05R10_2side | TP9 |
| 1 | P06 | TestPoint_hole_H05R10_2side | TP10 |
| 1 | P07 | TestPoint_hole_H05R10_2side | TP11 |
| 1 | P08 | TestPoint_hole_H05R10_2side | TP12 |
| 1 | P09 | TestPoint_hole_H05R10_2side | TP13 |
| 1 | P10 | TestPoint_hole_H05R10_2side | TP14 |
| 1 | P11 | TestPoint_hole_H05R10_2side | TP15 |
| 1 | P12 | TestPoint_hole_H05R10_2side | TP16 |
| 1 | P13 | TestPoint_hole_H05R10_2side | TP17 |
| 1 | VDD2 | TestPoint_hole_H05R10_2side | TP18 |
| 1 | P29 | TestPoint_hole_H05R10_2side | TP20 |
| 1 | P28 | TestPoint_hole_H05R10_2side | TP21 |
| 1 | P27 | TestPoint_hole_H05R10_2side | TP22 |
| 1 | P26 | TestPoint_hole_H05R10_2side | TP23 |
| 1 | P25 | TestPoint_hole_H05R10_2side | TP24 |
| 1 | P24 | TestPoint_hole_H05R10_2side | TP25 |
| 1 | P23 | TestPoint_hole_H05R10_2side | TP26 |
| 1 | P22 | TestPoint_hole_H05R10_2side | TP27 |
| 1 | P21 | TestPoint_hole_H05R10_2side | TP28 |
| 1 | P20 | TestPoint_hole_H05R10_2side | TP29 |
| 1 | P19 | TestPoint_hole_H05R10_2side | TP30 |
| 1 | P18 | TestPoint_hole_H05R10_2side | TP31 |
| 1 | P17 | TestPoint_hole_H05R10_2side | TP32 |
| 1 | P16 | TestPoint_hole_H05R10_2side | TP33 |
| 1 | P15 | TestPoint_hole_H05R10_2side | TP34 |
| 1 | P14 | TestPoint_hole_H05R10_2side | TP35 |
| 1 | A7 LCSC | SOD-123F-hand | D1 |
| 4 | SD05 | SOD-323-nexperia-hand | D2, D3, D4, D5 |
| 1 | LED | LED_0603_hand | D6 |
| 1 | 600 | L_0603 | FB1 |
| 1 | 10n | C_0603 | C1 |
| 2 | 2.2n | C_0603 | C2, C3 |
| 1 | 10u | C_0603 | C4 |
| 4 | 1u | C_0603 | C5, C6, C7, C8 |
| 3 | 1K | R_0603_hand | R1, R2, R12 |
| 1 | 10 | R_0603_hand | R3 |
| 8 | 1K | R_0805+0603 | R4, R5, R6, R7, R8, R9, R10, R11 |
Nuclone small MCP355X design files
The KiCad project lives in the Squantor/squantorDevelBoards repository on GitHub; these links point at the commit this page was built from.
Nuclone small MCP355X: common questions
How big is the Nuclone small MCP355X PCB?
The Nuclone small MCP355X measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nuclone small MCP355X?
81 components, from 58 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nuclone small MCP355X design files?
From the Squantor/squantorDevelBoards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nuclone small MCP355X design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
More boards in squantorDevelBoards
NXPNuclone LPC845M301BD48 small
50 × 50 mm67 parts2LMIT1
Nuclone JTAG interface
50 × 50 mm64 parts2LMIT1
RP2040/RP2350Nuclone RP2040 SOIC
50 × 50 mm56 parts4LMIT1
RP2040/RP2350Nuclone RP2040 SON
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC844M201BD64
48.3 × 76.2 mm56 parts2LMIT1
RP2040/RP2350Nuclone RP2040 WSON
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC845M301BD48 medium
50 × 76.2 mm54 parts2LMIT1
NXPNuclone LPC1125JBD48
48.3 × 76.2 mm46 parts2LMIT1
RP2040/RP2350Nuclone pi pico USB-c
50 × 76.2 mm20 parts2LMIT1
RP2040/RP2350Nuclone RP2040 aliexpress
50 × 76.2 mm17 parts2LMIT1
RP2040/RP2350Nuclone pi pico direct
50 × 76.2 mm17 parts2LMIT1
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979