HardLabs

Nuclone RP2040 SON

Squantor·squantorDevelBoards·electronics/nuclone_RP2040_SON/nuclone_RP2040_SON.kicad_pcb

Nuclone RP2040 SON PCB layout, top view — open source RP2040/RP2350 board by Squantor

About the Nuclone RP2040 SON PCB

Nuclone RP2040 SON is an open source RP2040/RP2350 PCB design by Squantor, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 50 mm, with 56 components from 34 distinct parts.

Its main chip is the rp2040, from the RP2040/RP2350 family. Other key parts include the MCP1702-MB, TPESD0504C6 and MX25L3233FZBI. By type, the board carries 21 capacitors, 15 resistors, 5 connectors, 4 ICs, 2 switches and 2 inductors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Various development boards/test for microcontrollers, check for breakouts here

Main components on the Nuclone RP2040 SON

MCP1702-MBTPESD0504C6rp2040MX25L3233FZBI

Nuclone RP2040 SON bill of materials (BOM)

56 components, 34 distinct parts.

QtyPartRefs
1
MCP1702-MB
U1
1
TPESD0504C6
U2
1
rp2040
U3
1
MX25L3233FZBI
U4
1
12MHz
Y1
1
JTAG_2X05
J1
1
TYPE-C-31-M-12
J2
1
nuclone_small_left
J3
1
nuclone_small_right
J4
1
Conn_02x06_Odd_Even
J5
1
0.5A
F1
1
V20230211
N2
1
JLCJLCJLCJLC
N3
1
NuClone RP2040 SON
N4
1
Nuclone Template 20220513
N5
1
RESET
SW1
1
Bootloader
SW2
1
GREEN
D2
1
600
FB1
1
600
FB2
Show 14 more
QtyPartRefs
3
10u
C1, C2, C23
13
1u
C4, C5, C6, C7, C8, C10, C13, C15 +5
1
100n
C9
2
22p
C11, C12
1
10n
C14
1
1u
C17
2
5.1K
R1, R7
5
47K
R2, R3, R4, R5, R6
1
10K
R8
1
TBD
R9
1
DNF
R10
2
1K
R11, R14
2
27
R12, R15
1
100
R13

Nuclone RP2040 SON design files

The KiCad project lives in the Squantor/squantorDevelBoards repository on GitHub; these links point at the commit this page was built from.

Nuclone RP2040 SON: common questions

What microcontroller does the Nuclone RP2040 SON use?

The Nuclone RP2040 SON is built around the rp2040, from the RP2040/RP2350 family.

How big is the Nuclone RP2040 SON PCB?

The Nuclone RP2040 SON measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Nuclone RP2040 SON?

56 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Nuclone RP2040 SON design files?

From the Squantor/squantorDevelBoards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Nuclone RP2040 SON design in my own project?

Yes, under the terms of its MIT license, which Squantor chose for the repository.

Can I test firmware for the Nuclone RP2040 SON without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in squantorDevelBoards

Similar boards