Nuclone pi pico USB-c
About the Nuclone pi pico USB-c PCB
Nuclone pi pico USB-c is an open source RP2040/RP2350 PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 76.2 mm, with 20 components from 15 distinct parts.
Its main chip is the RaspberryPiPico, from the RP2040/RP2350 family. By type, the board carries 8 resistors, 5 connectors, 1 IC, 1 diode and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Various development boards/test for microcontrollers, check for breakouts here
Main components on the Nuclone pi pico USB-c
Nuclone pi pico USB-c bill of materials (BOM)
20 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPiPico | RaspberryPi_Pico_Original_SMD_nokeepout_USB_TP_TH | U3 |
| 1 | JTAG_2X05 | Header-0127-2X05-H006 | J1 |
| 1 | USB-C_PD_USB | USB-C-HRO-31-M-12_aisler | J2 |
| 1 | nuclone_medium_left | nuclone_medium_left_stacked | J3 |
| 1 | nuclone_medium_right | nuclone_medium_right_stacked | J4 |
| 1 | Conn_02x06_Odd_Even | Header-0127-2X04-H006 | J5 |
| 1 | V20240426 | Label_Generic | N2 |
| 1 | JLCJLCJLCJLC | Label_Generic | N3 |
| 1 | Raspberry Pi Pico USB-C | Label_Generic | N4 |
| 1 | Nuclone Template V20240114 | Label_Generic | N5 |
| 1 | GREEN | LED_0603_hand | D2 |
| 1 | 10u | C_0603 | C3 |
| 2 | 5K1 | R_0603_hand | R1, R7 |
| 5 | 47K | R_0603_hand | R2, R3, R4, R5, R6 |
| 1 | 1K | R_0603_hand | R14 |
Nuclone pi pico USB-c design files
The KiCad project lives in the Squantor/squantorDevelBoards repository on GitHub; these links point at the commit this page was built from.
Nuclone pi pico USB-c: common questions
What microcontroller does the Nuclone pi pico USB-c use?
The Nuclone pi pico USB-c is built around the RaspberryPiPico, from the RP2040/RP2350 family.
How big is the Nuclone pi pico USB-c PCB?
The Nuclone pi pico USB-c measures 50 × 76.2 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Nuclone pi pico USB-c?
20 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nuclone pi pico USB-c design files?
From the Squantor/squantorDevelBoards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nuclone pi pico USB-c design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
Can I test firmware for the Nuclone pi pico USB-c without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in squantorDevelBoards
Nuclone small MCP355X
50 × 50 mm81 parts2LMIT1
NXPNuclone LPC845M301BD48 small
50 × 50 mm67 parts2LMIT1
Nuclone JTAG interface
50 × 50 mm64 parts2LMIT1
RP2040/RP2350Nuclone RP2040 SON
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC844M201BD64
48.3 × 76.2 mm56 parts2LMIT1
RP2040/RP2350Nuclone RP2040 WSON
50 × 50 mm56 parts4LMIT1
RP2040/RP2350Nuclone RP2040 SOIC
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC845M301BD48 medium
50 × 76.2 mm54 parts2LMIT1
NXPNuclone LPC1125JBD48
48.3 × 76.2 mm46 parts2LMIT1
RP2040/RP2350Nuclone pi pico direct
50 × 76.2 mm17 parts2LMIT1
RP2040/RP2350Nuclone RP2040 aliexpress
50 × 76.2 mm17 parts2LMIT1
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k