Nuclone LPC845M301BD48 small
About the Nuclone LPC845M301BD48 small PCB
Nuclone LPC845M301BD48 small is an open source NXP PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 67 components from 44 distinct parts.
Its main chip is the LPC845M301JBD48, from the NXP family. Other key parts include the MCP1702-MB, TPESD0504C6, CH340B, reference_sot23-3 and generic SPI flash. By type, the board carries 19 capacitors, 14 resistors, 10 test points, 6 ICs, 5 connectors and 3 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Various development boards/test for microcontrollers, check for breakouts here
Main components on the Nuclone LPC845M301BD48 small
Nuclone LPC845M301BD48 small bill of materials (BOM)
67 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1702-MB | SOT89-NXP | U1 |
| 1 | TPESD0504C6 | SOT363-ONsemi | U2 |
| 1 | LPC845M301JBD48 | SOT313-2-NXP | U3 |
| 1 | CH340B | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | reference_sot23-3 | SOT23-3 | U5 |
| 1 | generic SPI flash | SOIC-8_dual_wide | U6 |
| 1 | 12MHz | Crystal_3225_4_hand | Y1 |
| 1 | JTAG_2X05 | Header-0127-2X05-H006 | J1 |
| 1 | TYPE-C-31-M-12 | USB-C-HRO-31-M-12 | J2 |
| 1 | nuclone_small_left | nuclone_small_left_stacked | J3 |
| 1 | nuclone_small_right | nuclone_small_right_stacked | J4 |
| 1 | Conn_02x06_Odd_Even | Header-0127-2X04-H006 | J5 |
| 1 | 0.5A | F_0603_hand | F1 |
| 1 | V20240712 | Label_Generic | N2 |
| 1 | JLCJLCJLCJLC | Label_Generic | N3 |
| 1 | NuClone LPC84X PQFP48 | Label_Generic | N4 |
| 1 | Nuclone Template 2024606 | Label_Generic | N5 |
| 1 | RESET | TD-85XU | SW1 |
| 1 | Bootloader | TD-85XU | SW2 |
| 1 | PIO0_26 | TestPoint_hole_H05R10 | TP1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIO0_27 | TestPoint_hole_H05R10 | TP2 |
| 1 | PIO0_15 | TestPoint_hole_H05R10 | TP3 |
| 1 | PIO0_16 | TestPoint_hole_H05R10 | TP4 |
| 1 | RTS | TestPoint_hole_H05R10 | TP5 |
| 1 | DTR | TestPoint_hole_H05R10 | TP6 |
| 1 | DCD | TestPoint_hole_H05R10 | TP7 |
| 1 | RI | TestPoint_hole_H05R10 | TP8 |
| 1 | DSR | TestPoint_hole_H05R10 | TP9 |
| 1 | CTS | TestPoint_hole_H05R10 | TP10 |
| 1 | B5819WS | SOD-323-nexperia-hand | D1 |
| 1 | GREEN | LED_0603_hand | D2 |
| 1 | RED | LED_0603_hand | D3 |
| 2 | 600 | L_0603 | FB1, FB2 |
| 5 | 10u | C_0603 | C1, C2, C3, C6, C11 |
| 7 | 1u | C_0603 | C4, C7, C8, C16, C17, C18, C19 |
| 1 | 100n | C_0603 | C5 |
| 2 | 18p | C_0603 | C9, C10 |
| 3 | 1u | C_0402 | C12, C13, C15 |
| 1 | 10n | C_0603 | C14 |
| 2 | 5.1K | R_0603_hand | R1, R7 |
| 5 | 47K | R_0603_hand | R2, R3, R4, R5, R6 |
| 3 | 10K | R_0603_hand | R8, R11, R12 |
| 2 | 470 | R_0603_hand | R9, R13 |
| 2 | 1K | R_0603_hand | R10, R14 |
Nuclone LPC845M301BD48 small design files
The KiCad project lives in the Squantor/squantorDevelBoards repository on GitHub; these links point at the commit this page was built from.
Nuclone LPC845M301BD48 small: common questions
What microcontroller does the Nuclone LPC845M301BD48 small use?
The Nuclone LPC845M301BD48 small is built around the LPC845M301JBD48, from the NXP family.
How big is the Nuclone LPC845M301BD48 small PCB?
The Nuclone LPC845M301BD48 small measures 50 × 50 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Nuclone LPC845M301BD48 small?
67 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nuclone LPC845M301BD48 small design files?
From the Squantor/squantorDevelBoards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nuclone LPC845M301BD48 small design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
Can I test firmware for the Nuclone LPC845M301BD48 small without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in squantorDevelBoards
Nuclone small MCP355X
50 × 50 mm81 parts2LMIT1
Nuclone JTAG interface
50 × 50 mm64 parts2LMIT1
RP2040/RP2350Nuclone RP2040 SOIC
50 × 50 mm56 parts4LMIT1
RP2040/RP2350Nuclone RP2040 SON
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC844M201BD64
48.3 × 76.2 mm56 parts2LMIT1
RP2040/RP2350Nuclone RP2040 WSON
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC845M301BD48 medium
50 × 76.2 mm54 parts2LMIT1
NXPNuclone LPC1125JBD48
48.3 × 76.2 mm46 parts2LMIT1
RP2040/RP2350Nuclone pi pico USB-c
50 × 76.2 mm20 parts2LMIT1
RP2040/RP2350Nuclone RP2040 aliexpress
50 × 76.2 mm17 parts2LMIT1
RP2040/RP2350Nuclone pi pico direct
50 × 76.2 mm17 parts2LMIT1
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532