Nuclone RP2040 aliexpress
About the Nuclone RP2040 aliexpress PCB
Nuclone RP2040 aliexpress is an open source RP2040/RP2350 PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 76.2 mm, with 17 components from 13 distinct parts.
Its main chip is the RP2040_aliexpress, from the RP2040/RP2350 family. By type, the board carries 6 resistors, 4 connectors, 1 IC, 1 diode and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Various development boards/test for microcontrollers, check for breakouts here
Main components on the Nuclone RP2040 aliexpress
Nuclone RP2040 aliexpress bill of materials (BOM)
17 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040_aliexpress | module_rp2040_aliexpress | U1 |
| 1 | JTAG_2X05 | Header-0127-2X05-H006 | J1 |
| 1 | nuclone_medium_left | nuclone_medium_left_stacked | J3 |
| 1 | nuclone_medium_right | nuclone_medium_right_stacked | J4 |
| 1 | Conn_02x06_Odd_Even | Header-0127-2X04-H006 | J5 |
| 1 | V20240426 | Label_Generic | N2 |
| 1 | JLCJLCJLCJLC | Label_Generic | N3 |
| 1 | NuClone RP2040 aliexpress | Label_Generic | N4 |
| 1 | Nuclone Template V20240218 | Label_Generic | N5 |
| 1 | GREEN | LED_0603_hand | D2 |
| 1 | 10u | C_0603 | C3 |
| 5 | 47K | R_0603_hand | R2, R3, R4, R5, R6 |
| 1 | 1K | R_0603_hand | R14 |
Nuclone RP2040 aliexpress design files
The KiCad project lives in the Squantor/squantorDevelBoards repository on GitHub; these links point at the commit this page was built from.
Nuclone RP2040 aliexpress: common questions
What microcontroller does the Nuclone RP2040 aliexpress use?
The Nuclone RP2040 aliexpress is built around the RP2040_aliexpress, from the RP2040/RP2350 family.
How big is the Nuclone RP2040 aliexpress PCB?
The Nuclone RP2040 aliexpress measures 50 × 76.2 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Nuclone RP2040 aliexpress?
17 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nuclone RP2040 aliexpress design files?
From the Squantor/squantorDevelBoards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nuclone RP2040 aliexpress design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
Can I test firmware for the Nuclone RP2040 aliexpress without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in squantorDevelBoards
Nuclone small MCP355X
50 × 50 mm81 parts2LMIT1
NXPNuclone LPC845M301BD48 small
50 × 50 mm67 parts2LMIT1
Nuclone JTAG interface
50 × 50 mm64 parts2LMIT1
RP2040/RP2350Nuclone RP2040 SON
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC844M201BD64
48.3 × 76.2 mm56 parts2LMIT1
RP2040/RP2350Nuclone RP2040 WSON
50 × 50 mm56 parts4LMIT1
RP2040/RP2350Nuclone RP2040 SOIC
50 × 50 mm56 parts4LMIT1
NXPNuclone LPC845M301BD48 medium
50 × 76.2 mm54 parts2LMIT1
NXPNuclone LPC1125JBD48
48.3 × 76.2 mm46 parts2LMIT1
RP2040/RP2350Nuclone pi pico USB-c
50 × 76.2 mm20 parts2LMIT1
RP2040/RP2350Nuclone pi pico direct
50 × 76.2 mm17 parts2LMIT1
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k