Overture

stanciugabriel·overture-pcb

Overture PCB layout, top view — open source ESP32 board by stanciugabriel

About the Overture PCB

Overture is an open source ESP32 PCB design by stanciugabriel, published on GitHub. It is a 2-layer board measuring 92 × 50 mm, with 46 components from 26 distinct parts.

Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the STUSB4500QTR, USBLC6-2SC6 and TPS54308DDCT. By type, the board carries 20 resistors, 10 capacitors, 4 ICs, 4 diodes, 2 transistors and 2 connectors.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

PCB Design made in KiCad for my automatic syringe pump project

Overture is a custom ESP32-C6 control board designed to drive a NEMA 17 stepper motor while handling NFC reading, a small display, and physical user inputs. Everything is powered through a single USB-C Power Delivery connection.

Microcontroller: ESP32-C6-WROOM-1 Motor Driver: TMC2208/TMC2209 setup driving a JST-XH port, sized for a NEMA 17 stepper. Peripheral Headers: Broken out pins for an ST7789 TFT screen, a PN532 NFC module, 3 push buttons, and a rotary encoder. Power Delivery: Uses an STUSB4500 PD controller to negotiate 20V directly from a USB-C wall adapter. Power Regulation: A…

Overture, from the project README
From the project README

Main components on the Overture

Overture bill of materials (BOM)

46 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STUSB4500QTR
U2
1
USBLC6-2SC6
U4
1
TPS54308DDCT
U5
1
ESP32-C6-WROOM-1
U6
1
C5361047
Stepper_Motor
M1
2
STL6P3LLH6
Q1, Q2
2
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1, J2
2
SW_Push
SW5, SW6
1
ESDA25W
D3
1
C7502694
Schottky
D4
2
ESDA25P35-1U1M
D11, D50
1
3.3UH
3.3uH
L1
4
1UF
1uF
C1, C2, C3, C4
1
6.8UF
6.8uF
C5
2
100NF
100nF
C6, C10
2
33UF
33uF
C7, C8
1
4.7UF
4.7uf
C50
1
470
R1
2
1k
R2, R4
1
100K
100k
R3
Show 6 more
QtyPartRefs
2
22K
22k
R5, R11
6
10K
10k
R6, R14, R15, R16, R18, R19
2
5.1K
5.1k
R7, R8
4
100K
100k
R10, R53, R54, R55
1
100
R13
1
4.7K
4.7k
R21

Overture design files

The KiCad project lives in the stanciugabriel/overture-pcb repository on GitHub; these links point at the commit this page was built from.

Overture: common questions

What microcontroller does the Overture use?

The Overture is built around the ESP32-C6-WROOM-1, from the ESP32 family.

How big is the Overture PCB?

The Overture measures 92 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Overture?

46 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Overture design files?

From the stanciugabriel/overture-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Overture design in my own project?

The repository has no license, so all rights stay with stanciugabriel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Overture without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards