6 open source boards using the SPF5043Z
Real designs built with the SPF5043Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Repeater memris V2a
ub1qbm
96 × 83 mm70 parts4LNo license1Nordic nRF
RemoteController
steewbsd
100 × 75 mm132 parts4LNo license0ESP32
RX 50MHz SDR
ne9n
150 × 85 mm44 parts2LNo license0Board a
ajisrawi
100 × 112 mm190 parts4LNo license1Board a easyeda routed
ajisrawi
100 × 112 mm190 parts4LNo license1Board a routed
ajisrawi
130 × 152 mm190 parts4LNo license1
The SPF5043Z in open source designs
The gallery holds 6 open source boards using the SPF5043Z from 4 GitHub repositories; a typical one measures about 100 × 98.5 mm and carries around 161 components.
83% use four copper layers or more, and 0% carry an open source license.
The most starred is Board a by ajisrawi.
Microcontrollers on boards using the SPF5043Z
What boards using the SPF5043Z are built for
SPF5043Z: common questions
Where can I find a SPF5043Z reference design?
Each of the 6 boards on this page is a real design using the SPF5043Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SPF5043Z use?
Most are built on AVR/Arduino (1), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the SPF5043Z?
The median is 100 × 98.5 mm, and 17% are two-layer designs.
What is the most popular open source board using the SPF5043Z?
By GitHub stars, Board a by ajisrawi, with 1 stars.
Can I simulate one of these boards using the SPF5043Z before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.