Mp3-player

stefanVanadium·mp3-player

Mp3-player PCB layout, top view — open source RP2040/RP2350 board by stefanVanadium

About the Mp3-player PCB

Mp3-player is an open source RP2040/RP2350 PCB design by stefanVanadium, published on GitHub under the MIT license. It is a 4-layer board measuring 38.2 × 99.6 mm, with 113 components from 26 distinct parts.

Its main chip is the ESP32-PICO-MINI-02-N8R2, from the RP2040/RP2350 family. Other key parts include the CP2102N-A02-GQFN24R, BQ25180YBGR, LM27762DSSR, TPS63802DLAR and MAX17048G+T10. By type, the board carries 44 capacitors, 42 resistors, 9 ICs, 8 switches, 2 transistors and 2 diodes.

It belongs with the audio, power & battery and iot & wireless designs in this gallery.

From the project

A modern hi-fi music player with a retro look. It plays FLAC/WAV through a proper DAC and headphone amp, streams to Bluetooth headphones, and has a reflective display you can read in direct sunlight.

A modern hi-fi music player with a retro look. It plays FLAC/WAV through a proper DAC and headphone amp, streams to Bluetooth headphones, and has a reflective display you can read in direct sunlight.

- Hi-fi audio path: PCM5122 DAC (112dB, 32-bit/384kHz) → OPA1622 headphone amp powered from clean ± rails - FLAC / WAV / MP3 from a push-push microSD card - Bluetooth A2DP to wireless headphones (classic ESP32) - 3.5mm jack with plug detection - Sunlight-readable display: Sharp LS013B7DH03 memory LCD, crisp in direct sun and almost zero power - Soft power: one button wakes the player from ship…

Mp3-player, from the project README
From the project README

Main components on the Mp3-player

Mp3-player bill of materials (BOM)

113 components, 26 distinct parts.

QtyPartRefs
1
CP2102N-A02-GQFN24R
SKYWORKS/SILICON LABS(芯科)
U1
1
BQ25180YBGR
TI(德州仪器)
U2
1
LM27762DSSR
TI(德州仪器)
U3
1
TPS63802DLAR
TI(德州仪器)
U4
1
MAX17048G+T10
ADI(亚德诺)/MAXIM(美信)
U5
1
LP5907MFX-3.3/NOPB
TI(德州仪器)
U6
1
ESP32-PICO-MINI-02-N8R2
ESPRESSIF(乐鑫)
U7
1
OPA1622IDRCR
TI(德州仪器)
U8
1
PCM5122PW
TI(德州仪器)
U9
2
MMBT3904(RANGE:100-300)
MMBT3904-C20526
CJ(江苏长电/长晶)
Q1, Q2
1
PJ-342C CB
SHOU HAN(首韩)
CN1
1
Battery_Cell
BT1
1
TF-01A
韩国韩荣
Card3
1
FH12-10S-0.5SH(55)
FH19C-10S-0.5SH(10)
HRS(广濑)
FPC4
2
TS-1088-AR02016
XUNPU(讯普)
SW1, SW3
1
TS-1088-AR02016
EVQP7J01P
XUNPU(讯普)
SW2
5
TS-1088-AR02016
TS-1187B-B
XUNPU(讯普)
SW4, SW5, SW6, SW7, SW8
1
TYPE-C 16P CB0.8 073
SHOU HAN(首韩)
USB1
1
USBLC6-2SC6
ST(意法半导体)
D1
1
D_Schottky
D2
Show 6 more
QtyPartRefs
1
WPN201610HR47MT
Sunlord(顺络)
L1
19
C
C1, C3, C6, C7, C11, C16, C18, C20 +11
20
C
C2, C5, C8, C10, C12, C13, C14, C15 +12
4
C
C4, C9, C17, C23
1
100nF
C44
42
R
R1, R2, R3, R4, R5, R6, R7, R8 +34

Mp3-player design files

The KiCad project lives in the stefanVanadium/mp3-player repository on GitHub; these links point at the commit this page was built from.

Mp3-player: common questions

What microcontroller does the Mp3-player use?

The Mp3-player is built around the ESP32-PICO-MINI-02-N8R2, from the RP2040/RP2350 family.

How big is the Mp3-player PCB?

The Mp3-player measures 38.2 × 99.6 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Mp3-player?

113 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mp3-player design files?

From the stefanVanadium/mp3-player repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mp3-player design in my own project?

Yes, under the terms of its MIT license, which stefanVanadium chose for the repository.

Can I test firmware for the Mp3-player without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards