5 open source boards using the LM27762DSSR

Real designs built with the LM27762DSSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LM27762DSSR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM27762DSSR connects to, and the resistors, capacitors and other passives placed on it.

  • The FB+_2 pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 200 kΩ).
  • The VIN_3 pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF (then 10 µF).
  • The CP_5 pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF.
  • The OUT-_6 pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 2.2 µF).
PGOOD_1pin 1Connected to: Signal 60% · GND 40%
  • Pull-up to VBUS on 60% · 10 kΩ (3)
FB+_2pin 2Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (2), 200 kΩ (1), 100 kΩ (1)
  • Pull-up to VP_CM on 80% · 10 kΩ (2), 9.16 kΩ (2), 75 kΩ (1)
VIN_3pin 3Connected to: VBUS 100%
  • Decoupling capacitor on 100% · 4.7 µF (2), 10 µF (2)
GND_4pin 4Connected to: GND 100%
CP_5pin 5Connected to: Signal 100%
  • Capacitor to GND on 100% · 4.7 µF (4)
OUT-_6pin 6Connected to: Signal 60% · 1.65V 40%
  • Capacitor to GND on 100% · 4.7 µF (4), 2.2 µF (1), 100 nF (1)
  • Series resistor on 60% · 10 kΩ (2), 170 kΩ (1)
FB-_7pin 7Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (2), 68 kΩ (1), 100 kΩ (1)
  • Series resistor on 60% · 9.09 kΩ (2), 10 kΩ (2), 170 kΩ (1)
  • Pull-up to 1.65V on 40% · 24 kΩ (1)
C-_9pin 9Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (2), 4.7 µF (2)
C1+_10pin 10Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (2), 4.7 µF (2)
OUT+_11pin 11Connected to: VP_CM 80% · a signal 20%
PAD_13pin 13Connected to: GND 100%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LPC4370-Oscillocope by BigLockie, MR1 by EpicQuestBio, MR1 by LokiMetaSmith and Pr2-usb headphone amplifier by seanahuynh.

The LM27762DSSR in open source designs

The gallery holds 5 open source boards using the LM27762DSSR from 5 GitHub repositories; a typical one measures about 80 × 60 mm and carries around 101 components.

100% use four copper layers or more, and 60% carry an open source license.

The most starred is LPC4370-Oscillocope by BigLockie.

Microcontrollers on boards using the LM27762DSSR

What boards using the LM27762DSSR are built for

LM27762DSSR: common questions

Where can I find a LM27762DSSR reference design?

Each of the 5 boards on this page is a real design using the LM27762DSSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LM27762DSSR FB+_2 pin?

The FB+_2 pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 200 kΩ). Counted from the KiCad layouts of 5 open source designs using the LM27762DSSR.

What decoupling capacitors do designs use on the LM27762DSSR VIN_3 pin?

The VIN_3 pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LM27762DSSR.

How is the LM27762DSSR CP_5 pin connected?

The CP_5 pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the LM27762DSSR.

What parts are used alongside the LM27762DSSR?

The ADR4520ARZ-R7, ESP32-S3-MINI-1U-N8, LT3045EDD-1#TRPBF, LT3094EDD#TRPBF and MCP4822T-E/SN appear in the most repositories here.

Which microcontrollers do boards using the LM27762DSSR use?

Most are built on ESP32 (2), NXP (1) and RP2040/RP2350 (1).

How big is a typical board using the LM27762DSSR?

The median is 80 × 60 mm, and 0% are two-layer designs.

What is the most popular open source board using the LM27762DSSR?

By GitHub stars, LPC4370-Oscillocope by BigLockie, with 1 stars.

Can I simulate one of these boards using the LM27762DSSR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part