Tfr9
strickyak·tfr9·tfr911h/tfr911h.kicad_pcb
About the Tfr9 PCB
Tfr9 is an open source RP2040/RP2350 PCB design by strickyak, published on GitHub under the MIT license. It is a 4-layer board measuring 82.8 × 62.8 mm, with 106 components from 31 distinct parts.
Its main chip is the RP2350B, from the RP2040/RP2350 family. Other key parts include the HC-1.0-3PWT, C427602, W25Q128 and MC6809E. By type, the board carries 26 capacitors, 12 resistors, 5 ICs, 3 diodes, 2 connectors and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 5 earlier revisions of it.
From the project
The TFR/9 Single Board Computer for Hitachi 6309E or Motorola 6809E CPUs (TFR/901)
This is an RP2350B Dev board that breaks out all 48 GPIO pins.
It follows the original footprint of the RP2040 dev board, but adds 10 pins on each side.
It is not pin compatible with the original RP2040, though a version that shares the same pinout, at least for the first 20 pins on each side would be interesting.
The production files for JLCPCB are in the 'production' directory.
Main components on the Tfr9
Tfr9 bill of materials (BOM)
106 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350B ~ Raspberry Pi(树莓派) | QFN-80_L10.0-W10.0-P0.40-TL-EP3.4 | U1 |
| 1 | HC-1.0-3PWT | CONN-SMD_3P-P1.0-HC-1.0-3PWT | U2 |
| 1 | C427602 ~ MICRONE(南京微盟) | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U3 |
| 1 | W25Q128 Winbond Elec | SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U4 |
| 1 | MC6809E | DIP-40_W15.24mm | U5 |
| 1 | C20625731 ~ ABRACON | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinSocket_2x10_P2.54mm_Vertical_SMD | J3 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 51 | Castellated Pad | Castellated Pad | 3V3_EN1, 3V31, ADC_VREF1, GND1, GND2, GND3, GND4, GND6 +43 |
| 2 | K2-1808SN-A4SW-01 韩国韩荣 | KEY-SMD_4P-L4.2-W3.2-P2.20-LS5.1-TL | Boot1, Reset1 |
| 1 | Red Hubei KENTO Elec | D_0603 | PWR_LED1 |
| 1 | C2765186 ~ SHOU HAN(首韩) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | C2286 Red Hubei KENTO Elec | LED0603-RD_RED | LED25 |
| 1 | C110493 ~ DIODES(美台) | POWERDI-123_L2.8-W1.8-LS3.7-RD | D1 |
| 2 | RCLAMP0521P.TCT-MS MSKSEMI(美森科) | D0402-BI | D2, D3 |
| 1 | C42411119 ~ ABRACON | IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L1 |
| 14 | 100NF 100nF SAMSUNG(三星) | C_0402 | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 3 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0603 | C10, C11, C12 |
| 2 | 15PF 15pF FH(风华) | C_0402 | C17, C18 |
| 1 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0402 | C19 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10UF 10uF Samsung Electro-Mechanics | C_0603 | C20, C37, C40 |
| 3 | 100NF 100nF YAGEO | C_0603 | C21, C38, C39 |
| 2 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R1, R4 |
| 3 | 33Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R2, R3, R6 |
| 1 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R5 |
| 1 | 1Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R7 |
| 1 | 200Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R8 |
| 1 | 5kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R9 |
| 1 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R11 |
| 1 | 2kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R12 |
| 1 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R28 |
Tfr9 design files
The KiCad project lives in the strickyak/tfr9 repository on GitHub; these links point at the commit this page was built from.
Tfr9: common questions
What microcontroller does the Tfr9 use?
The Tfr9 is built around the RP2350B, from the RP2040/RP2350 family.
How big is the Tfr9 PCB?
The Tfr9 measures 82.8 × 62.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tfr9?
106 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tfr9 design files?
From the strickyak/tfr9 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tfr9 design in my own project?
Yes, under the terms of its MIT license, which strickyak chose for the repository.
Can I test firmware for the Tfr9 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Earlier revisions in the repo: tfr905h, tfr905g, tfr903f, tfr903d, tfr901g
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k