Avionics-Andromeda

StudentOrganisationForAerospaceResearch·Avionics-Andromeda·AndromedaV1/Kicad Design Files/AndromedaV1.kicad_pcb

Avionics-Andromeda PCB layout, top view — open source STM32 board by StudentOrganisationForAerospaceResearch

About the Avionics-Andromeda PCB

Avionics-Andromeda is an open source STM32 PCB design by StudentOrganisationForAerospaceResearch, published on GitHub. It is a 4-layer board measuring 50 × 70 mm, with 86 components from 35 distinct parts.

Its main chip is the STM32F405R, from the STM32 family. Other key parts include the FT230XS, LDO 3.3V, LDO 5V, LIS3DH and MAX31856. By type, the board carries 33 capacitors, 23 resistors, 12 connectors, 8 ICs, 6 diodes and 1 transistor.

It belongs with the sensors designs in this gallery.

From the project

Avionics STM32 Sensor Development Hardware

Main components on the Avionics-Andromeda

Avionics-Andromeda bill of materials (BOM)

86 components, 35 distinct parts.

QtyPartRefs
1
FT230XS
U1
1
LDO 3.3V
U2
1
LDO 5V
U3
1
STM32F405R
U4
1
LIS3DH
U5
1
MAX31856
U6
1
LSM9DS1
U7
1
MS5607
U8
1
NMOS
Q1
1
Crystal_8MHz
Y1
1
USB_MINIB
J1
1
Barrel_Jack
J2
1
Conn_02x04_Odd_Even
J3
1
Micro_SD_Card
J4
1
Conn_01x02
J5
2
Conn_01x06
J6, J7
3
Conn_01x04
J8, J9, J13
2
Conn_02x03_Odd_Even
J11, J12
1
SW_DIP_x04
SW1
2
Green
D1, D4
Show 15 more
QtyPartRefs
1
Red
D2
1
Schottky
D3
2
LED
D5, D6
1
Ferrite
L1
2
47pF
C1, C2
4
10nF
C3, C19, C23, C24
5
10uF
C4, C13, C21, C28, C33
13
0.1uF
C5, C15, C16, C18, C20, C22, C25, C26 +5
4
2.2uF
C6, C8, C10, C11
3
1uF
C7, C9, C17
2
24pF
C12, C14
2
27
R1, R2
5
330
R3, R4, R5, R20, R23
14
10K
R6, R7, R8, R9, R12, R13, R14, R15 +6
2
100
R10, R11

Avionics-Andromeda design files

The KiCad project lives in the StudentOrganisationForAerospaceResearch/Avionics-Andromeda repository on GitHub; these links point at the commit this page was built from.

Avionics-Andromeda: common questions

What microcontroller does the Avionics-Andromeda use?

The Avionics-Andromeda is built around the STM32F405R, from the STM32 family.

How big is the Avionics-Andromeda PCB?

The Avionics-Andromeda measures 50 × 70 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Avionics-Andromeda?

86 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Avionics-Andromeda design files?

From the StudentOrganisationForAerospaceResearch/Avionics-Andromeda repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Avionics-Andromeda design in my own project?

The repository has no license, so all rights stay with StudentOrganisationForAerospaceResearch. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Avionics-Andromeda without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards