13 open source boards using the LDO - 3.3V
Real designs built with the LDO - 3.3V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NF6-MCP2210-v03
nanofury
65 × 40 mm95 parts2LGPL-3.062STM32
Avionics-Andromeda
StudentOrganisationForAerospaceResearch
50 × 70 mm86 parts4LNo license0NF1-MCP2210-v07
nanofury
47.5 × 25 mm55 parts2LGPL-3.062NF1-MCP2210-v07-Yellowjacket
nanofury
47.5 × 30 mm55 parts2LGPL-3.062NF2-MCP2210-v05
nanofury
55 × 40 mm55 parts2LGPL-3.062NF2-MCP2210-v05-Ernst
nanofury
55 × 40 mm55 parts2LGPL-3.062NF2-MCP2210-v05-MLM
nanofury
55 × 40 mm55 parts2LGPL-3.062NF2-MCP2210-v05-PANEL
nanofury
113 × 195 mm55 parts2LGPL-3.062NF2-MCP2210-v05 with dimensions
nanofury
55 × 40 mm55 parts2LGPL-3.062NF6-MCP2210-v01 with dimensions
nanofury
55 × 40 mm55 parts2LGPL-3.062NF6-MCP2210-v02 with dimensions
nanofury
55 × 40 mm55 parts2LGPL-3.062NF6-MCP2210-v03 with dimensions
nanofury
55 × 40 mm55 parts2LGPL-3.062NanoFury NF2
nanofury
50 × 30 mm53 parts2LGPL-3.062
The LDO - 3.3V in open source designs
The gallery holds 13 open source boards using the LDO - 3.3V from 2 GitHub repositories; a typical one measures about 55 × 40 mm and carries around 55 components.
92% are two-layer designs, the rest use four layers or more, and 92% carry an open source license.
The most starred is NF6-MCP2210-v03 by nanofury.
Microcontrollers on boards using the LDO - 3.3V
What boards using the LDO - 3.3V are built for
LDO - 3.3V: common questions
Where can I find a LDO - 3.3V reference design?
Each of the 13 boards on this page is a real design using the LDO - 3.3V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LDO - 3.3V use?
Most are built on STM32 (1).
How big is a typical board using the LDO - 3.3V?
The median is 55 × 40 mm, and 92% are two-layer designs.
What is the most popular open source board using the LDO - 3.3V?
By GitHub stars, NF6-MCP2210-v03 by nanofury, with 62 stars.
Can I simulate one of these boards using the LDO - 3.3V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.