Dummy device

sullyjason·MoodLogger·EmotionTracker_PCF8523/Dummy device/Dummy device.kicad_pcb

Dummy device PCB layout, top view — open source board by sullyjason

About the Dummy device PCB

Dummy device is an open source PCB design by sullyjason, published on GitHub. It is a 2-layer board measuring 20.3 × 22.9 mm, with 3 components from 3 distinct parts.

By type, the board carries 1 switch, 1 diode and 1 resistor.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows

A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows up as an ordinary USB flash drive — no companion app, no driver, no cloud. Grab the CSV, done.

Dummy device, from the project README
From the project README

Dummy device bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SW_MEC_5E
Slide_Switch_SPDT_P3mm_10x5x10mm
SW1
1
LED
D1
1
10K
Resistor
R1

Dummy device design files

The KiCad project lives in the sullyjason/MoodLogger repository on GitHub; these links point at the commit this page was built from.

Dummy device: common questions

How big is the Dummy device PCB?

The Dummy device measures 20.3 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dummy device?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dummy device design files?

From the sullyjason/MoodLogger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dummy device design in my own project?

The repository has no license, so all rights stay with sullyjason. Use it as a reference, and ask the author before reusing the design.

More boards in MoodLogger

Similar boards