EmotionTracker
sullyjason·MoodLogger·EmotionTracker_PCF8523/EmotionTracker.kicad_pcb
About the EmotionTracker PCB
EmotionTracker is an open source PCB design by sullyjason, published on GitHub. It is a 2-layer board measuring 32.9 × 33.4 mm, with 28 components from 13 distinct parts.
Other key parts include the SeeeduinoXIAO and PCF8523T. By type, the board carries 12 resistors, 6 switches, 5 capacitors, 2 ICs, 1 crystal and 1 battery holder.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows
A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows up as an ordinary USB flash drive — no companion app, no driver, no cloud. Grab the CSV, done.

Main components on the EmotionTracker
EmotionTracker bill of materials (BOM)
28 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SeeeduinoXIAO | Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM | U1 |
| 1 | PCF8523T | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CRYSTAL_32.768KHZ Crystal_32.768kHz | Crystal_SMD_Abracon_ABS25-4Pin_8.0x3.8mm | Y1 |
| 1 | CR1216 | BatteryHolder_LINX_BAT-HLD-012-SMT | BT1 |
| 4 | SW_MEC_5E | SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW1, SW2, SW3, SW4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW5 |
| 1 | Push_Button | SW_SPST_B3U-3000P-B | SW6 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 4 | 1UF 1uF | C_0603_1608Metric | C1, C2, C3, C4 |
| 1 | 10UF 10uF | C_0805_2012Metric | C5 |
| 6 | 10K 10k | R_0603_1608Metric | R1, R3, R5, R7, R9, R10 |
| 5 | 1k | R_0603_1608Metric | R2, R4, R6, R8, R11 |
| 1 | R | R_0603_1608Metric | R12 |
EmotionTracker design files
The KiCad project lives in the sullyjason/MoodLogger repository on GitHub; these links point at the commit this page was built from.
EmotionTracker: common questions
How big is the EmotionTracker PCB?
The EmotionTracker measures 32.9 × 33.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EmotionTracker?
28 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EmotionTracker design files?
From the sullyjason/MoodLogger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EmotionTracker design in my own project?
The repository has no license, so all rights stay with sullyjason. Use it as a reference, and ask the author before reusing the design.
More boards in MoodLogger
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k