MoodLogger v1

sullyjason·MoodLogger·MoodLogger_v1/MoodLogger_v1.kicad_pcb

MoodLogger v1 PCB layout, top view — open source Microchip SAM board by sullyjason

About the MoodLogger v1 PCB

MoodLogger v1 is an open source Microchip SAM PCB design by sullyjason, published on GitHub. It is a 2-layer board measuring 30 × 30 mm, with 48 components from 32 distinct parts.

Its main chip is the ATSAMD21G18A-A, from the Microchip SAM family. Other key parts include the RV-3028-C7, AP2112K-3.3TRG1, MCP73831T-2ACI/OT and W25Q32JVSS. By type, the board carries 20 resistors, 12 capacitors, 5 ICs, 5 switches, 2 connectors and 1 transistor.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows

A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows up as an ordinary USB flash drive — no companion app, no driver, no cloud. Grab the CSV, done.

MoodLogger v1, from the project README
From the project README

Main components on the MoodLogger v1

MoodLogger v1 bill of materials (BOM)

48 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATSAMD21G18A-A
U1
1
RV-3028-C7
U2
1
AP2112K-3.3TRG1
U5
1
MCP73831T-2ACI/OT
U6
1
W25Q32JVSS
U7
1
DMG3415U
Q1
1
CRYSTAL_32.768KHZ
32.768kHz
Y1
1
USB_C_Receptacle
J2
1
JST_2mm_LiPo
J3
2
SW_MEC_5E
SW2, SW3
1
SW_MEC_5E
Slide_Switch_SPDT
SW4
2
SW_MEC_5E
SW5, SW6
1
ORANGE
CHG2
1
MBR120
D2
1
1UF
1uF
Samsung Electro-Mechanics
C1
1
100nF
Samsung Electro-Mechanics
C6
5
1uF
Samsung Electro-Mechanics
C10, C15, C16, C17, C18
2
10uF
Samsung Electro-Mechanics
C19, C20
1
10µF
C21
2
22pF
C22, C23
Show 12 more
QtyPartRefs
1
10K
5.1k
R1
1
5.1k
R2
1
10K
10k
R3
3
10kΩ
UNI-ROYAL(Uniroyal Elec)
R6, R22, R23
1
10K
100Ω
UNI-ROYAL(Uniroyal Elec)
R7
1
10K
10k
R9
1
10K
1k
R10
4
1K
R11, R14, R20, R21
2
10k
R12, R19
1
100kΩ
UNI-ROYAL(Uniroyal Elec)
R13
1
10K\
R15
3
100kΩ
UNI-ROYAL(Uniroyal Elec)
R16, R17, R18

MoodLogger v1 design files

The KiCad project lives in the sullyjason/MoodLogger repository on GitHub; these links point at the commit this page was built from.

MoodLogger v1: common questions

What microcontroller does the MoodLogger v1 use?

The MoodLogger v1 is built around the ATSAMD21G18A-A, from the Microchip SAM family.

How big is the MoodLogger v1 PCB?

The MoodLogger v1 measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MoodLogger v1?

48 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MoodLogger v1 design files?

From the sullyjason/MoodLogger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MoodLogger v1 design in my own project?

The repository has no license, so all rights stay with sullyjason. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MoodLogger v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in MoodLogger

Similar boards