EmotionTracker DS32

sullyjason·MoodLogger·EmotionTracker_DS32/EmotionTracker_DS32.kicad_pcb

EmotionTracker DS32 PCB layout, top view — open source board by sullyjason

About the EmotionTracker DS32 PCB

EmotionTracker DS32 is an open source PCB design by sullyjason, published on GitHub. It is a 2-layer board measuring 32.9 × 33.4 mm, with 25 components from 10 distinct parts.

Other key parts include the SeeeduinoXIAO and DS3231M. By type, the board carries 10 resistors, 7 capacitors, 5 switches, 2 ICs and 1 battery holder.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows

A tiny, battery-powered button logger. Press one of (at least) four buttons and the device wakes up, appends which button was pressed at what time to a CSV file, and goes back to sleep. To get the data, you plug the device into any USB host (cable or docking station) and it shows up as an ordinary USB flash drive — no companion app, no driver, no cloud. Grab the CSV, done.

EmotionTracker DS32, from the project README
From the project README

Main components on the EmotionTracker DS32

EmotionTracker DS32 bill of materials (BOM)

25 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SeeeduinoXIAO
U1
1
DS3231M
U2
1
CR1216
BT1
4
SW_MEC_5E
SW1, SW2, SW3, SW4
1
SW_SPDT
SW5
4
1UF
1uF
C1, C2, C3, C4
1
10UF
10uF
C5
2
100NF_CERAMIC
100nF_Ceramic
C6, C7
6
10K
10k
R1, R3, R5, R7, R9, R10
4
1k
R2, R4, R6, R8

EmotionTracker DS32 design files

The KiCad project lives in the sullyjason/MoodLogger repository on GitHub; these links point at the commit this page was built from.

EmotionTracker DS32: common questions

How big is the EmotionTracker DS32 PCB?

The EmotionTracker DS32 measures 32.9 × 33.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EmotionTracker DS32?

25 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EmotionTracker DS32 design files?

From the sullyjason/MoodLogger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EmotionTracker DS32 design in my own project?

The repository has no license, so all rights stay with sullyjason. Use it as a reference, and ask the author before reusing the design.

More boards in MoodLogger

Similar boards