HardLabs

EasyPCB 10 nrf24l01pbackupremove

sundberg84·HomeAutomation·EasyPCB/Rev 10_NRF24l01p/EasyPCB_10_nrf24l01pbackupremove.kicad_pcb

EasyPCB 10 nrf24l01pbackupremove PCB layout, top view — open source AVR/Arduino board by sundberg84
Simulate this board

About the EasyPCB 10 nrf24l01pbackupremove PCB

EasyPCB 10 nrf24l01pbackupremove is an open source AVR/Arduino PCB design by sundberg84, published on GitHub. It is a 2-layer board measuring 50 × 49.9 mm, with 30 components from 27 distinct parts.

Its main chip is the ArduinoProMini, from the AVR/Arduino family. Other key parts include the DC/DCBooster, LE33, NRF24L01, ATSHA204A and AT25DF512C. By type, the board carries 8 connectors, 7 capacitors, 6 ICs, 5 resistors and 4 jumpers.

From the project

Everything from sundberg84 homeautomation - mostly for backup!

Main components on the EasyPCB 10 nrf24l01pbackupremove

ArduinoProMiniDC/DCBoosterLE33NRF24L01ATSHA204AAT25DF512C

EasyPCB 10 nrf24l01pbackupremove bill of materials (BOM)

30 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ArduinoProMini
IC1
1
DC/DCBooster
U1
1
LE33
U2
1
NRF24L01
U3
1
ATSHA204A
U4
1
AT25DF512C
U5
1
Power
P1
1
MYSX_2.4
P2
1
X4
P4
1
X5
P5
1
X6
P6
1
X7
P7
1
X8
P8
1
X9
P9
1
REG
JP1
1
BAT
JP2
1
RAW
JP3
1
JUMPER
JP4
1
0,1uF
C1
1
10uF
C2
Show 7 more
QtyPartRefs
2
C
C3, C4
2
0,1uF
C5, C7
1
4,7uF
C6
1
R
R1
1
470k
R2
1
1M
R3
2
10k
R4, R7

EasyPCB 10 nrf24l01pbackupremove design files

The KiCad project lives in the sundberg84/HomeAutomation repository on GitHub; these links point at the commit this page was built from.

EasyPCB 10 nrf24l01pbackupremove: common questions

What microcontroller does the EasyPCB 10 nrf24l01pbackupremove use?

The EasyPCB 10 nrf24l01pbackupremove is built around the ArduinoProMini, from the AVR/Arduino family.

How big is the EasyPCB 10 nrf24l01pbackupremove PCB?

The EasyPCB 10 nrf24l01pbackupremove measures 50 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EasyPCB 10 nrf24l01pbackupremove?

30 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EasyPCB 10 nrf24l01pbackupremove design files?

From the sundberg84/HomeAutomation repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the EasyPCB 10 nrf24l01pbackupremove design in my own project?

The repository has no license, so all rights stay with sundberg84. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EasyPCB 10 nrf24l01pbackupremove without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in HomeAutomation

Similar boards