11 open source boards using the ATSHA204A

Real designs built with the ATSHA204A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ATSHA204A

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ATSHA204A connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 56 kΩ).
  • Pin 2 is tied to 3.3V on 6 of 6 designs.
  • Pin 3 is tied to GND on 6 of 6 designs.
  • Pin 2 has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
Pin 1Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 83% · 10 kΩ (3), 56 kΩ (1), 4.7 kΩ (1)
Pin 2Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (6)
Pin 3Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Capacitive soil moisture sensor by RonMcKay, Mew by konachan700, MySensorsNode by fallberg and SensebenderGW by mysensors.

The ATSHA204A in open source designs

The gallery holds 11 open source boards using the ATSHA204A from 7 GitHub repositories; a typical one measures about 50 × 49.9 mm and carries around 40 components.

100% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.

The most starred is Capacitive soil moisture sensor by RonMcKay.

Microcontrollers on boards using the ATSHA204A

What boards using the ATSHA204A are built for

ATSHA204A: common questions

Where can I find a ATSHA204A reference design?

Each of the 11 boards on this page is a real design using the ATSHA204A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ATSHA204A pin 1?

Pin 1 has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 56 kΩ). Counted from the KiCad layouts of 7 open source designs using the ATSHA204A.

How is the ATSHA204A pin 2 connected?

Pin 2 is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ATSHA204A.

How is the ATSHA204A pin 3 connected?

Pin 3 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ATSHA204A.

What parts are used alongside the ATSHA204A?

The NRF24L01, RFM69HW, AMS1117-3.3, ArduinoProMini and AT25DF512C appear in the most repositories here.

Which microcontrollers do boards using the ATSHA204A use?

Most are built on AVR/Arduino (8), Microchip SAM (2) and STM32 (1).

How big is a typical board using the ATSHA204A?

The median is 50 × 49.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATSHA204A?

By GitHub stars, Capacitive soil moisture sensor by RonMcKay, with 88 stars.

Can I simulate one of these boards using the ATSHA204A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part