EasyPCB 10 RFM69hw
About the EasyPCB 10 RFM69hw PCB
EasyPCB 10 RFM69hw is an open source AVR/Arduino PCB design by sundberg84, published on GitHub. It is a 2-layer board measuring 50 × 49.9 mm, with 30 components from 26 distinct parts.
Its main chip is the ArduinoProMini, from the AVR/Arduino family. Other key parts include the DC/DCBooster, LE33, RFM69HW, ATSHA204A and AT25DF512C. By type, the board carries 8 connectors, 6 ICs, 6 capacitors, 5 resistors, 3 jumpers and 2 antennas.
From the project
Everything from sundberg84 homeautomation - mostly for backup!
Main components on the EasyPCB 10 RFM69hw
EasyPCB 10 RFM69hw bill of materials (BOM)
30 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ArduinoProMini | pro_mini | IC1 |
| 1 | DC/DCBooster | Pin_Header_Straight_1x03_Pitch2.54mm | U1 |
| 1 | LE33 | TO-92_LE33_Andreas | U2 |
| 1 | RFM69HW | RFM69HW_SMD_ThroughHole_Handsoldering | U3 |
| 1 | ATSHA204A | SOT-23_Handsoldering | U4 |
| 1 | AT25DF512C | SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 1 | Power | 3_block_Screw_Terminal | P1 |
| 1 | MYSX_2.4 | MYSX_2.4 | P2 |
| 1 | X4 | Pin_Header_Straight_1x04_Pitch2.54mm | P4 |
| 1 | X5 | Pin_Header_Straight_1x04_Pitch2.54mm | P5 |
| 1 | X6 | Pin_Header_Straight_1x04_Pitch2.54mm | P6 |
| 1 | X7 | Pin_Header_Straight_1x04_Pitch2.54mm | P7 |
| 1 | X | Pin_Header_Straight_1x02_Pitch2.54mm | P8 |
| 1 | X9 | Pin_Header_Straight_1x02_Pitch2.54mm | P9 |
| 1 | ANTENNA | SMA_EDGE | ANT1 |
| 1 | ANTENNA | Pin_Header_Straight_1x01_Pitch2.54mm | ANT2 |
| 1 | REG | Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | BAT | Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | RAW | Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 3 | 0,1uF | CP_Radial_D5.0mm_P2.50mm | C1, C3, C4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 2 | 0,1uF | C_0805_HandSoldering | C5, C7 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 2 | 10k | R_0805_HandSoldering | R4, R7 |
EasyPCB 10 RFM69hw design files
The KiCad project lives in the sundberg84/HomeAutomation repository on GitHub; these links point at the commit this page was built from.
EasyPCB 10 RFM69hw: common questions
What microcontroller does the EasyPCB 10 RFM69hw use?
The EasyPCB 10 RFM69hw is built around the ArduinoProMini, from the AVR/Arduino family.
How big is the EasyPCB 10 RFM69hw PCB?
The EasyPCB 10 RFM69hw measures 50 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EasyPCB 10 RFM69hw?
30 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EasyPCB 10 RFM69hw design files?
From the sundberg84/HomeAutomation repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the EasyPCB 10 RFM69hw design in my own project?
The repository has no license, so all rights stay with sundberg84. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EasyPCB 10 RFM69hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in HomeAutomation
Similar boards
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoEasyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
AVR/ArduinoEasyduino Atmega Nano
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746
AVR/ArduinoUsbGpib
xyphro
54 × 15 mm21 parts2LMIT683
AVR/ArduinoLumberjack
peej
284.7 × 94.2 mm149 parts2LMIT402