6 open source boards using the AT25DF512C

Real designs built with the AT25DF512C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The AT25DF512C in open source designs

The gallery holds 6 open source boards using the AT25DF512C from 2 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 44 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is LE-BOX-0028 by fallberg.

Parts used alongside the AT25DF512C

Microcontrollers on boards using the AT25DF512C

AT25DF512C: common questions

Where can I find a AT25DF512C reference design?

Each of the 6 boards on this page is a real design using the AT25DF512C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AT25DF512C?

The ArduinoProMini, ATSHA204A, NRF24L01 and RFM69HW appear in the most repositories here.

Which microcontrollers do boards using the AT25DF512C use?

Most are built on AVR/Arduino (6).

How big is a typical board using the AT25DF512C?

The median is 50 × 50 mm, and 100% are two-layer designs.

What is the most popular open source board using the AT25DF512C?

By GitHub stars, LE-BOX-0028 by fallberg, with 7 stars.

Can I simulate one of these boards using the AT25DF512C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part