Better lamp controller

super-cow-powers·better-lamp-controller

Better lamp controller PCB layout, top view — open source RP2040/RP2350 board by super-cow-powers

About the Better lamp controller PCB

Better lamp controller is an open source RP2040/RP2350 PCB design by super-cow-powers, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 90 × 60 mm, with 95 components from 40 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the LP5860T, 74LVC2G66, MAX98360A, W25Q16JVSSIQ and 74LVC1G08. By type, the board carries 46 capacitors, 25 resistors, 12 ICs, 8 connectors, 1 crystal and 1 battery holder.

It belongs with the audio designs in this gallery.

From the project

A custom lamp controller with audio, controlled with an RP2040

Main components on the Better lamp controller

LP5860T74LVC2G66RP2040MAX98360AW25Q16JVSSIQ74LVC1G08TLV7012LMR33620BDDAPCF2131MAX6106OPT4048

Better lamp controller bill of materials (BOM)

95 components, 40 distinct parts.

QtyPartRefs
1
LP5860T
U1
1
74LVC2G66
U2
1
RP2040
U3
1
MAX98360A
U4
1
W25Q16JVSSIQ
W25Q16JVSS
U5
2
74LVC1G08
U6, U8
1
TLV7012
U7
1
LMR33620BDDA
U9
1
PCF2131
U10
1
MAX6106
U11
1
OPT4048
U12
1
RH100-12.000-18-2030-TR
Y1
1
Conn_02x20_Odd_Even
J1
1
Micro_SD_Card_Det_Hirose_DM3AT
J2
1
HC-TYPE-C-16P-01A
J3
1
Conn_02x10_Odd_Even
J4
1
Conn_01x05_Pin
J5
1
Conn_01x02_Pin
J6
1
Conn_01x04_Pin
J7
1
PR20B05VBDN
Conn_ARM_JTAG_SWD_10
J9
Show 20 more
QtyPartRefs
1
CR2032 Lithium Primary
BT1
1
SolderJumper_2_Open
JP1
1
XGL4030-472 4u7, .035R, 2.1A Isat
L1
6
1u
C1, C4, C5, C31, C36, C46
15
CL10B104KB8NNWC
0u1
C2, C9, C15, C16, C17, C18, C19, C20 +7
2
1n
C3, C8
15
0u1
C6, C10, C12, C25, C29, C30, C32, C37 +7
1
10u
C7
1
100u
C13
3
22u
C14, C33, C34
2
CC0603JPNPO9BN270
18p
C27, C28
1
CL10B104KB8NNWC
1n
C35
10
43R
R1, R2, R3, R4, R6, R7, R8, R13 +2
3
CR0603-FX-1301ELF
1k3
R5, R27, R28
3
5k1
R9, R10, R17
4
100k
R11, R16, R20, R22
1
43k
R21
1
10k
R23
1
470R
R24
2
27R
R25, R26

Better lamp controller design files

The KiCad project lives in the super-cow-powers/better-lamp-controller repository on GitHub; these links point at the commit this page was built from.

Better lamp controller: common questions

What microcontroller does the Better lamp controller use?

The Better lamp controller is built around the RP2040, from the RP2040/RP2350 family.

How big is the Better lamp controller PCB?

The Better lamp controller measures 90 × 60 mm, has 4 copper layers and is 1.645 mm thick.

How many components are on the Better lamp controller?

95 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the Better lamp controller design files?

From the super-cow-powers/better-lamp-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Better lamp controller design in my own project?

Yes, under the terms of its BSD-3-Clause license, which super-cow-powers chose for the repository.

Can I test firmware for the Better lamp controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in better-lamp-controller

Similar boards