Alarm IO Board
super-cow-powers·better-lamp-controller·Alarm IO Board/Alarm IO Board.kicad_pcb
About the Alarm IO Board
Alarm IO Board is an open source PCB design by super-cow-powers, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 80 × 65 mm, with 45 components from 25 distinct parts.
Other key parts include the SN74LVC1G132, TLV1824, DRV8837C, OPT4048 and AD5274BRMZ-100. By type, the board carries 18 capacitors, 12 ICs, 6 switches, 5 resistors, 2 connectors and 1 inductor.
It belongs with the audio designs in this gallery.
From the project
A custom lamp controller with audio, controlled with an RP2040
Main components on the Alarm IO Board
Alarm IO Board bill of materials (BOM)
45 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74LVC1G132 | SOT-23-5 | U1, U9 |
| 4 | TLV1824 | SOT-23-THIN-14_2x4.2mm_P0.5_TI-DYY_HandSoldering | U2, U4, U11, U12 |
| 1 | DRV8837C | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_HandSoldering | U3 |
| 1 | OPT4048 | SOT-583_DTS | U6 |
| 1 | AD5274BRMZ-100 | MSOP-10_3x3mm_P0.5mm | U7 |
| 1 | TPS7A0525PDBV | SOT-23-5 | U8 |
| 1 | TLV61046ADB | SOT-23-6 | U10 |
| 1 | TCA9555PWR | TSSOP-24_4.4x7.8mm_P0.65mm | U13 |
| 1 | Conn_02x10_Odd_Even | IDC-Header_2x10_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 6 | Wurth WS-TATV | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | IVL2-7/5 | IVL2-75 | VFD1 |
| 1 | XGL4030-103 10u | L_Coilcraft_XxL4030 | L1 |
| 4 | 0u1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C11, C12 |
| 1 | 1u, 50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 4 | CL10B104KB8NNWC 0u1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6, C14 |
| 3 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9 |
| 1 | CC0603JPNPO9BN270 18p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 4u7 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 4 | CL10B104KB8NNWC 0u1, 50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16, C17, C18 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 330k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 510k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 470R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
Alarm IO Board design files
The KiCad project lives in the super-cow-powers/better-lamp-controller repository on GitHub; these links point at the commit this page was built from.
Alarm IO Board: common questions
How big is the Alarm IO Board?
The Alarm IO Board measures 80 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Alarm IO Board?
45 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Alarm IO Board design files?
From the super-cow-powers/better-lamp-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Alarm IO Board design in my own project?
Yes, under the terms of its BSD-3-Clause license, which super-cow-powers chose for the repository.
More boards in better-lamp-controller
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687