Deskpetproject

Suprim-SB·deskpetproject

Deskpetproject PCB layout, top view — open source ESP32 board by Suprim-SB

About the Deskpetproject PCB

Deskpetproject is an open source ESP32 PCB design by Suprim-SB, published on GitHub. It is a 2-layer board measuring 132 × 97.8 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors, keyboards and displays & leds designs in this gallery.

From the project

A desk pet called Starbie. Starbie is a tiny, starry digital pet that replaces traditional buttons with pure gesture control.

Prices may fluctuate _PCB prices (JLCPCB) PCB price = $10.30 Delivery fee (the resonably priced one takes long 18-24 days) = $15.33 OR a faster one at ~35$ for shipping Total = 25.63 (but with a coupon for new user it becomes 15.33)

Deskpetproject, from the project README
From the project README

Main components on the Deskpetproject

Deskpetproject bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Display
J1
1
MPU
J2
2
SW_Push
SW1, SW2
1
10k
R1

Deskpetproject design files

The KiCad project lives in the Suprim-SB/deskpetproject repository on GitHub; these links point at the commit this page was built from.

Deskpetproject: common questions

What microcontroller does the Deskpetproject use?

The Deskpetproject is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Deskpetproject PCB?

The Deskpetproject measures 132 × 97.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Deskpetproject?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Deskpetproject design files?

From the Suprim-SB/deskpetproject repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Deskpetproject design in my own project?

The repository has no license, so all rights stay with Suprim-SB. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Deskpetproject without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards