ConnAdapter
SuzieLinux·kicad_projects·ConnAdapter/ConnAdapter.kicad_pcb
About the ConnAdapter PCB
ConnAdapter is an open source PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90 × 100 mm, with 11 components from 10 distinct parts.
By type, the board carries 9 connectors and 2 resistors.
From the project
This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/
This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/
The project lcd_adapter is a board to adapt the 3.2 or 3.4 inch LCD designed for the RPI so they can be used with other boards like my RL78 boards or Linux boards like the beagle boards, youyeetoo, cubitruck, odroid or others.
ConnAdapter bill of materials (BOM)
11 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x20_Counter_Clockwise | DIP-40_W25.4mm_LongPads | P1 |
| 1 | Conn_02x16_Counter_Clockwise | PLCC-32_THT-Socket | P2 |
| 1 | Conn_02x10_Counter_Clockwise | PLCC-20_THT-Socket | P3 |
| 1 | Conn_02x14_Counter_Clockwise | PLCC-28_THT-Socket | P4 |
| 1 | CCS Programmer | RJ12_Amphenol_54601-x06_Horizontal | P5 |
| 1 | T48 Programmer | XGecu_16pins | P6 |
| 1 | PIC Debug | PinSocket_1x06_P2.54mm_Vertical | P7 |
| 1 | E2 Lite Debugger | IDC-Header_2x07_P2.54mm_Vertical | P8 |
| 1 | G13, G14, G23 or G24 | PinHeader_1x05_P2.54mm_Vertical | P9 |
| 2 | 1k | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R3 |
ConnAdapter design files
The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.
ConnAdapter: common questions
How big is the ConnAdapter PCB?
The ConnAdapter measures 90 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ConnAdapter?
11 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the ConnAdapter design files?
From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ConnAdapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.
More boards in kicad_projects
Renesas
RL78 F14 48p Rev2
SuzieLinux
100 × 100 mm48 parts2LGPL-3.00RL78 G24 Rev3
SuzieLinux
100 × 100 mm42 parts2LGPL-3.00STM32
Board stm32 rev2
SuzieLinux
100 × 100 mm37 parts2LGPL-3.00RL78 G23 Arduino
SuzieLinux
100 × 57 mm33 parts2LGPL-3.00Beagle-AI-64-CAN-Part2
SuzieLinux
86.4 × 54.8 mm33 parts2LGPL-3.00Renesas
RL78 F14 32p Rev2
SuzieLinux
100 × 100 mm33 parts2LGPL-3.00Renesas
RL78 G14 Arduino 48p
SuzieLinux
100 × 57 mm29 parts2LGPL-3.00PocketBeagle2Cape rev1
SuzieLinux
101.8 × 55.3 mm27 parts2LGPL-3.00AVR/Arduino
PocketBeagle2 cape
SuzieLinux
101.8 × 55.3 mm25 parts2LGPL-3.00Renesas
RA2E1-CAN-Rev2
SuzieLinux
92 × 70 mm25 parts2LGPL-3.00Beagle-AI-64-CAN-Part1
SuzieLinux
86.4 × 54.8 mm17 parts2LGPL-3.00