Board stm32 rev2

SuzieLinux·kicad_projects·board_stm32_rev2/board_stm32_rev2.kicad_pcb

Board stm32 rev2 layout, top view — open source STM32 board by SuzieLinux

About the Board stm32 rev2

Board stm32 rev2 is an open source STM32 PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 37 components from 24 distinct parts.

Its main chip is the STM32F103R8T6, from the STM32 family. Other key parts include the TPS7B8333QDCYRQ1, MCP2562-E-P and CH340G. By type, the board carries 16 capacitors, 11 connectors, 4 ICs, 3 crystals, 2 jumpers and 1 resistor.

From the project

This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/

This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/

The project lcd_adapter is a board to adapt the 3.2 or 3.4 inch LCD designed for the RPI so they can be used with other boards like my RL78 boards or Linux boards like the beagle boards, youyeetoo, cubitruck, odroid or others.

Main components on the Board stm32 rev2

Board stm32 rev2 bill of materials (BOM)

37 components, 24 distinct parts.

QtyPartRefs
1
TPS7B8333QDCYRQ1
U1
1
STM32F103R8T6
U2
1
MCP2562-E-P
U3
1
CH340G
U4
1
8Mhz
Y1
1
32.768khz
Y2
1
12Mhz
Y3
1
+3.3V Supply
P1
1
Misc IOs 2
P2
1
Conn_STLINK
P3
1
POWER_JACKPTH
P4
1
Misc IOs 1
P5
1
Battery
P6
2
catu:MIKROBUS_HOST_CONN
P7, P9
2
USB_B
P8, P10
1
F09HP
P11
1
+3.3 V on battery
JP1
1
En term res
JP2
7
CC0603KRX7R9BB104
0.1uF
C1, C2, C3, C11, C13, C15, C16
2
47uF
C4, C10
Show 4 more
QtyPartRefs
4
22pF
C5, C6, C7, C9
1
0.1uF
C8
2
CC0603KRX7R9BB104
22pF
C12, C14
1
120
R1

Board stm32 rev2 design files

The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.

Board stm32 rev2: common questions

What microcontroller does the Board stm32 rev2 use?

The Board stm32 rev2 is built around the STM32F103R8T6, from the STM32 family.

How big is the Board stm32 rev2?

The Board stm32 rev2 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Board stm32 rev2?

37 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Board stm32 rev2 design files?

From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Board stm32 rev2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.

Can I test firmware for the Board stm32 rev2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in kicad_projects

Similar boards