PocketBeagle2 cape

SuzieLinux·kicad_projects·PocketBeagle2_cape/PocketBeagle2_cape.kicad_pcb

PocketBeagle2 cape PCB layout, top view — open source AVR/Arduino board by SuzieLinux

About the PocketBeagle2 cape PCB

PocketBeagle2 cape is an open source AVR/Arduino PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 101.8 × 55.3 mm, with 25 components from 20 distinct parts.

Its main chip is the 3.5 inch LCD, from the AVR/Arduino family. Other key parts include the PocketBeagle2, MCP2562-E-P and TPS2051CDBV. By type, the board carries 10 connectors, 7 capacitors, 4 ICs, 2 switches, 1 inductor and 1 resistor.

From the project

This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/

This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/

The project lcd_adapter is a board to adapt the 3.2 or 3.4 inch LCD designed for the RPI so they can be used with other boards like my RL78 boards or Linux boards like the beagle boards, youyeetoo, cubitruck, odroid or others.

Main components on the PocketBeagle2 cape

PocketBeagle2 cape bill of materials (BOM)

25 components, 20 distinct parts.

QtyPartRefs
1
PocketBeagle2
U1
2
MCP2562-E-P
U2, U3
1
TPS2051CDBV
U4
1
USB-A-H
P1
1
POWER_JACKPTH
P2
1
GPIO1
P3
1
GPIO2
P4
1
GPIO3
P5
1
GPIO4
P6
1
GPIO5
P7
1
Supply
P8
1
CAN
P9
1
3.5 inch LCD
P14
1
Power
S1
1
Reset
S2
1
FerriteBead
FB1
5
0.1uF
C3, C4, C6, C7, C8
1
47uF
C5
1
10uF
C9
1
4.7k
R1

PocketBeagle2 cape design files

The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.

PocketBeagle2 cape: common questions

What microcontroller does the PocketBeagle2 cape use?

The PocketBeagle2 cape is built around the 3.5 inch LCD, from the AVR/Arduino family.

How big is the PocketBeagle2 cape PCB?

The PocketBeagle2 cape measures 101.8 × 55.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PocketBeagle2 cape?

25 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the PocketBeagle2 cape design files?

From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PocketBeagle2 cape design in my own project?

Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.

Can I test firmware for the PocketBeagle2 cape without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in kicad_projects

Similar boards