RL78 F14 32p Rev2

SuzieLinux·kicad_projects·RL78_F14_32p_Rev2/RL78_F14_32p_Rev2.kicad_pcb

RL78 F14 32p Rev2 PCB layout, top view — open source Renesas board by SuzieLinux

About the RL78 F14 32p Rev2 PCB

RL78 F14 32p Rev2 is an open source Renesas PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 33 components from 23 distinct parts.

Its main chip is the R5F10BELNA#5, from the Renesas family. Other key parts include the AMS1117-3.3 and MCP2562FD. By type, the board carries 8 capacitors, 7 connectors, 7 resistors, 6 diodes, 3 ICs and 1 jumper.

It belongs with the displays & leds designs in this gallery.

From the project

This board uses a RL78 F14 The configuration for F14 is only supported by applilet3 Take note that the software for the on board CAN is not supported by applilet3

This board uses a RL78 F14 The configuration for F14 is only supported by applilet3 Take note that the software for the on board CAN is not supported by applilet3

Once I have this board working I will publish my source code

The board runs at 3.3V. The LCD is Chanruida 1.8 inch TFT LCD 128 × 160 color screen ST7735 SPI display LCD module with SD card slot arduino display display lcd

Main components on the RL78 F14 32p Rev2

RL78 F14 32p Rev2 bill of materials (BOM)

33 components, 23 distinct parts.

QtyPartRefs
1
R5F10BELNA#5
R5F10PBELNA
U1
1
AMS1117-3.3
U2
1
MCP2562FD
U4
1
POWER_JACKPTH
P1
1
E2 Lite
P2
1
F09HP
P3
1
Keypad
P4
1
LCD-1.8
P5
1
SD_Connector
P6
1
SPI_to_eth
P8
1
En term res
JP1
1
10-XX
S1
5
1N4448
D1, D2, D3, D4, D5
1
LED
D6
2
CC0603KRX7R9BB104
0.1uF
C1, C4
2
47uF
C2, C3
3
0.1uF
C5, C7, C8
1
0.47uF
C6
1
1k
R1
3
10k
R2, R5, R6
Show 3 more
QtyPartRefs
1
4.7k
R3
1
180
R4
1
120
R7

RL78 F14 32p Rev2 design files

The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.

RL78 F14 32p Rev2: common questions

What microcontroller does the RL78 F14 32p Rev2 use?

The RL78 F14 32p Rev2 is built around the R5F10BELNA#5, from the Renesas family.

How big is the RL78 F14 32p Rev2 PCB?

The RL78 F14 32p Rev2 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RL78 F14 32p Rev2?

33 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the RL78 F14 32p Rev2 design files?

From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RL78 F14 32p Rev2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.

Can I test firmware for the RL78 F14 32p Rev2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Renesas firmware against it before you order a PCB.

More boards in kicad_projects

Similar boards