PocketBeagle2Cape rev1
SuzieLinux·kicad_projects·PocketBeagle2Cape_rev1/PocketBeagle2Cape_rev1.kicad_pcb
About the PocketBeagle2Cape rev1 PCB
PocketBeagle2Cape rev1 is an open source PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 101.8 × 55.3 mm, with 27 components from 22 distinct parts.
Other key parts include the PocketBeagle2, MCP2562-E-P and TPS2051CDBV. By type, the board carries 12 connectors, 7 capacitors, 4 ICs, 2 switches, 1 inductor and 1 resistor.
From the project
This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/
This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/
The project lcd_adapter is a board to adapt the 3.2 or 3.4 inch LCD designed for the RPI so they can be used with other boards like my RL78 boards or Linux boards like the beagle boards, youyeetoo, cubitruck, odroid or others.
Main components on the PocketBeagle2Cape rev1
PocketBeagle2Cape rev1 bill of materials (BOM)
27 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PocketBeagle2 | PocketBeagle2 | U1 |
| 2 | MCP2562-E-P | SO-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 1 | TPS2051CDBV | SOT-23-5 | U4 |
| 1 | USB-A-H | USB-A-H | P1 |
| 1 | POWER_JACKPTH | POWER_JACK_PTH | P2 |
| 1 | LCD Control pins | PinHeader_1x05_P2.00mm_Vertical | P3 |
| 1 | LCD Data Bus | PinHeader_1x08_P2.00mm_Vertical | P4 |
| 1 | LCD SD SPI | PinHeader_1x04_P2.00mm_Vertical | P5 |
| 1 | GPIO1 | PinHeader_1x07_P2.00mm_Vertical | P6 |
| 1 | GPIO2 | PinHeader_1x06_P2.00mm_Vertical | P7 |
| 1 | GPIO3 | PinHeader_1x06_P2.00mm_Vertical | P8 |
| 1 | GPIO4 | PinHeader_1x07_P2.00mm_Vertical | P9 |
| 1 | GPIO5 | PinHeader_1x06_P2.00mm_Vertical | P10 |
| 1 | Supply | PinSocket_1x03_P2.54mm_Vertical | P11 |
| 1 | CAN | F09HP | P12 |
| 1 | Power | B3F-10XX | S1 |
| 1 | Reset | B3F-10XX | S2 |
| 1 | FerriteBead | D_0805_2012Metric | FB1 |
| 5 | 0.1uF | C_0805_2012Metric | C3, C4, C6, C7, C8 |
| 1 | 47uF | CP_Radial_D6.3mm_P2.50mm | C5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C9 |
| 1 | 4.7k | R_0805_2012Metric | R1 |
PocketBeagle2Cape rev1 design files
The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.
PocketBeagle2Cape rev1: common questions
How big is the PocketBeagle2Cape rev1 PCB?
The PocketBeagle2Cape rev1 measures 101.8 × 55.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PocketBeagle2Cape rev1?
27 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the PocketBeagle2Cape rev1 design files?
From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PocketBeagle2Cape rev1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.
More boards in kicad_projects
Renesas
RL78 F14 48p Rev2
SuzieLinux
100 × 100 mm48 parts2LGPL-3.00RL78 G24 Rev3
SuzieLinux
100 × 100 mm42 parts2LGPL-3.00STM32
Board stm32 rev2
SuzieLinux
100 × 100 mm37 parts2LGPL-3.00Beagle-AI-64-CAN-Part2
SuzieLinux
86.4 × 54.8 mm33 parts2LGPL-3.00RL78 G23 Arduino
SuzieLinux
100 × 57 mm33 parts2LGPL-3.00Renesas
RL78 F14 32p Rev2
SuzieLinux
100 × 100 mm33 parts2LGPL-3.00Renesas
RL78 G14 Arduino 48p
SuzieLinux
100 × 57 mm29 parts2LGPL-3.00Renesas
RA2E1-CAN-Rev2
SuzieLinux
92 × 70 mm25 parts2LGPL-3.00AVR/Arduino
PocketBeagle2 cape
SuzieLinux
101.8 × 55.3 mm25 parts2LGPL-3.00Beagle-AI-64-CAN-Part1
SuzieLinux
86.4 × 54.8 mm17 parts2LGPL-3.00ConnAdapter
SuzieLinux
90 × 100 mm11 parts2LGPL-3.00