RA2E1-CAN-Rev2

SuzieLinux·kicad_projects·RA2E1-CAN-Rev2/RA2E1-CAN-Rev2.kicad_pcb

RA2E1-CAN-Rev2 PCB layout, top view — open source Renesas board by SuzieLinux

About the RA2E1-CAN-Rev2 PCB

RA2E1-CAN-Rev2 is an open source Renesas PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 92 × 70 mm, with 25 components from 18 distinct parts.

Its main chip is the R7FA2E1A93, from the Renesas family. Other key parts include the MCP2518FDT-E_SL, MCP2562FD and TPS7B8333QDCYRQ1. By type, the board carries 11 capacitors, 6 connectors, 4 ICs, 2 resistors, 1 crystal and 1 jumper.

It belongs with the displays & leds designs in this gallery.

From the project

This board uses Renesas R7FA2E1A93 Arm Cortex-M23 device

This board uses Renesas R7FA2E1A93 Arm Cortex-M23 device

This is work in progress. I need to test with the evaluation board before I finalize the design and order boards.

The LCD is Chanruida 1.8 inch TFT LCD 128 × 160 color screen ST7735 SPI display LCD module with SD card slot arduino display display lcd

The ethernet adapter is a small board called W5500 SPI to LAN ethernet network module

Main components on the RA2E1-CAN-Rev2

R7FA2E1A93MCP2518FDT-E_SLMCP2562FDTPS7B8333QDCYRQ1

RA2E1-CAN-Rev2 bill of materials (BOM)

25 components, 18 distinct parts.

QtyPartRefs
1
R7FA2E1A93
U1
1
MCP2518FDT-E_SL
U3
1
MCP2562FD
U4
1
TPS7B8333QDCYRQ1
U6
1
16Mhz
X1
1
E2_LITE_RA
P1
1
POWER_JACKPTH
P2
1
LCD-1.8
P3
1
CAN
P4
1
SD_Connector
P8
1
SPI_to_eth
P9
1
En term res
JP1
2
22pF
C5, C6
6
0.1uF
C7, C8, C10, C12, C13, C17
2
47uF
C9, C18
1
4.7uF
C15
1
120
R1
1
4.7k
R3

RA2E1-CAN-Rev2 design files

The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.

RA2E1-CAN-Rev2: common questions

What microcontroller does the RA2E1-CAN-Rev2 use?

The RA2E1-CAN-Rev2 is built around the R7FA2E1A93, from the Renesas family.

How big is the RA2E1-CAN-Rev2 PCB?

The RA2E1-CAN-Rev2 measures 92 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RA2E1-CAN-Rev2?

25 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the RA2E1-CAN-Rev2 design files?

From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RA2E1-CAN-Rev2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.

Can I test firmware for the RA2E1-CAN-Rev2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Renesas firmware against it before you order a PCB.

More boards in kicad_projects

Similar boards