RL78 G24 Rev3
SuzieLinux·kicad_projects·RL78_G24_Rev3/RL78_G24_Rev3.kicad_pcb
About the RL78 G24 Rev3 PCB
RL78 G24 Rev3 is an open source PCB design by SuzieLinux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 42 components from 26 distinct parts.
Other key parts include the R7F101GB, AMS1117-3.3, MCP23008-E/P, MCP2518 and MCP2562FD. By type, the board carries 11 capacitors, 11 resistors, 7 connectors, 5 ICs, 5 diodes and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
This board can use a RL78 G14 or G24, G24 is a newer device which is pin compatible but uses a different program for configuration
This board can use a RL78 G14 or G24, G24 is a newer device which is pin compatible but uses a different program for configuration
The G14 uses applilet3 and the G24 uses the smart configurator.
I have not tested this board yet but it should work as it is based on other working boards. If I find issues when I receive the boards I will make an update to the design
Main components on the RL78 G24 Rev3
RL78 G24 Rev3 bill of materials (BOM)
42 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R7F101GB | LQFP-32_7x7mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | MCP23008-E/P MCP23008-E_P Microchip Technology | DIP-18_W7.62mm | U3 |
| 1 | MCP2518 | MCP2518FD | U4 |
| 1 | MCP2562FD | DIP-8_W7.62mm | U5 |
| 1 | 4Mhz | Crystal_HC49-4H_Vertical | Y2 |
| 1 | POWER_JACKPTH | POWER_JACK_PTH | P1 |
| 1 | E2 Lite | PinHeader_1x05_P2.54mm_Vertical | P2 |
| 1 | Keypad | PinHeader_1x09_P2.54mm_Vertical | P3 |
| 1 | F09HP | F09HP | P5 |
| 1 | SPI_to_eth | SPI_to_eth | P6 |
| 1 | LCD-1.8 | PinHeader_1x08_P2.54mm_Vertical | P7 |
| 1 | SD_Connector | PinHeader_1x04_P2.54mm_Vertical | P8 |
| 1 | En term res | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 10-XX | B3F-10XX | S1 |
| 5 | 1N4448 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5 |
| 2 | CC0603KRX7R9BB104 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 47uF | CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 1 | 0.47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 2 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9, C10, C11 |
| 1 | 1k | R_0805_2012Metric | R1 |
| 5 | 10k | R_0805_2012Metric | R2, R9, R10, R11, R12 |
| 1 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 1 | 120 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R7 |
RL78 G24 Rev3 design files
The KiCad project lives in the SuzieLinux/kicad_projects repository on GitHub; these links point at the commit this page was built from.
RL78 G24 Rev3: common questions
How big is the RL78 G24 Rev3 PCB?
The RL78 G24 Rev3 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RL78 G24 Rev3?
42 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the RL78 G24 Rev3 design files?
From the SuzieLinux/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RL78 G24 Rev3 design in my own project?
Yes, under the terms of its GPL-3.0 license, which SuzieLinux chose for the repository.
More boards in kicad_projects
Renesas
RL78 F14 48p Rev2
SuzieLinux
100 × 100 mm48 parts2LGPL-3.00STM32
Board stm32 rev2
SuzieLinux
100 × 100 mm37 parts2LGPL-3.00Beagle-AI-64-CAN-Part2
SuzieLinux
86.4 × 54.8 mm33 parts2LGPL-3.00RL78 G23 Arduino
SuzieLinux
100 × 57 mm33 parts2LGPL-3.00Renesas
RL78 F14 32p Rev2
SuzieLinux
100 × 100 mm33 parts2LGPL-3.00Renesas
RL78 G14 Arduino 48p
SuzieLinux
100 × 57 mm29 parts2LGPL-3.00PocketBeagle2Cape rev1
SuzieLinux
101.8 × 55.3 mm27 parts2LGPL-3.00Renesas
RA2E1-CAN-Rev2
SuzieLinux
92 × 70 mm25 parts2LGPL-3.00AVR/Arduino
PocketBeagle2 cape
SuzieLinux
101.8 × 55.3 mm25 parts2LGPL-3.00Beagle-AI-64-CAN-Part1
SuzieLinux
86.4 × 54.8 mm17 parts2LGPL-3.00ConnAdapter
SuzieLinux
90 × 100 mm11 parts2LGPL-3.00
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k