SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod

sysmatt·SYSMATT-MATRIX-CARRIER·kicad/ATTIC/SYSMATT-WS2812-MATRIX-CARRIER-pre-dual-esp-mod.kicad_pcb

SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod PCB layout, top view — open source ESP32 board by sysmatt

About the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod PCB

SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod is an open source ESP32 PCB design by sysmatt, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 162 × 162 mm, with 22 components from 14 distinct parts.

Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. By type, the board carries 15 connectors, 4 capacitors, 1 IC, 1 fuse and 1 jumper.

It belongs with the displays & leds designs in this gallery.

From the project

If you end up building these, please tag me on social media... @SYSMATT on X/Twitter - TY!

If you end up building these, please tag me on social media... @SYSMATT on X/Twitter - TY!

These cheap pre-made WS2812B flexible matrix boards are plentiful and availible on Amazon/Aliexpress/etc.

They look great through a 1mm FR4 PCB diffuser.

In this repo is the carrier board I created to control them with the common 30pin or 38pin ESP32 WROOM modules.

It supports WLED easily, and even has suport for audio reactive WLED using the common 6-pin INMP441 digital microphone modules.

SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod, from the project README
From the project README

Main components on the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod

SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod bill of materials (BOM)

22 components, 14 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32D
U1
1
D-IN (NO POWER)
J1
1
D-OUT (NO POWER)
J2
4
Conn_01x19_Pin
J3, J12, J13, J14
2
D-OUT
J4, J9
2
POWER
J5, J7
2
D-IN
J6, J8
1
V-IN
J11
1
INMP441-GND-VDD-SD
J15
1
INMP441-LR-WS-SCK
J16
1
Fuse
F1
1
Jumper_2_Open
JP1
2
C
C1, C3
2
C_Polarized
C2, C4

SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod design files

The KiCad project lives in the sysmatt/SYSMATT-MATRIX-CARRIER repository on GitHub; these links point at the commit this page was built from.

SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod: common questions

What microcontroller does the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod use?

The SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod is built around the ESP32-DEVKITC-32D, from the ESP32 family.

How big is the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod PCB?

The SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod measures 162 × 162 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod?

22 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod design files?

From the sysmatt/SYSMATT-MATRIX-CARRIER repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod design in my own project?

Yes, under the terms of its GPL-3.0 license, which sysmatt chose for the repository.

Can I test firmware for the SYSMATT-WS2812-MATRIX-CARRIER-pre dual esp mod without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in SYSMATT-MATRIX-CARRIER

Similar boards