SYSMATT-WS2812-MATRIX-CARRIER-32X8

sysmatt·SYSMATT-MATRIX-CARRIER·kicad/32x8/SYSMATT-WS2812-MATRIX-CARRIER-32X8.kicad_pcb

SYSMATT-WS2812-MATRIX-CARRIER-32X8 PCB layout, top view — open source ESP32 board by sysmatt

About the SYSMATT-WS2812-MATRIX-CARRIER-32X8 PCB

SYSMATT-WS2812-MATRIX-CARRIER-32X8 is an open source ESP32 PCB design by sysmatt, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 321 × 81 mm, with 28 components from 21 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the ESP32-DEVKITC-32D and 74LS125. By type, the board carries 19 connectors, 4 capacitors, 3 ICs, 1 fuse and 1 jumper.

It belongs with the displays & leds designs in this gallery.

From the project

If you end up building these, please tag me on social media... @SYSMATT on X/Twitter - TY!

If you end up building these, please tag me on social media... @SYSMATT on X/Twitter - TY!

These cheap pre-made WS2812B flexible matrix boards are plentiful and availible on Amazon/Aliexpress/etc.

They look great through a 1mm FR4 PCB diffuser.

In this repo is the carrier board I created to control them with the common 30pin or 38pin ESP32 WROOM modules.

It supports WLED easily, and even has suport for audio reactive WLED using the common 6-pin INMP441 digital microphone modules.

SYSMATT-WS2812-MATRIX-CARRIER-32X8, from the project README
From the project README

Main components on the SYSMATT-WS2812-MATRIX-CARRIER-32X8

SYSMATT-WS2812-MATRIX-CARRIER-32X8 bill of materials (BOM)

28 components, 21 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
ESP32-DEVKITC-32D
U2
1
74LS125
U3
1
D-IN (NO POWER)
J1
1
D-OUT (NO POWER)
J2
4
Screw_Terminal_01x03
J3, J12, J18, J19
2
POWER
J5, J7
1
D-IN
J8
1
D-OUT
J9
2
Conn_02x22_Odd_Even
J10, J17
1
V-IN
J11
1
OUT16
J13
1
OUT18
J14
1
INMP441-GND-VDD-SD
J15
1
INMP441-LR-WS-SCK
J16
1
OUT17
J20
1
OUT19
J21
1
Fuse
F1
1
Jumper_2_Open
JP1
2
C
C1, C3
Show 1 more
QtyPartRefs
2
C_Polarized
C2, C4

SYSMATT-WS2812-MATRIX-CARRIER-32X8 design files

The KiCad project lives in the sysmatt/SYSMATT-MATRIX-CARRIER repository on GitHub; these links point at the commit this page was built from.

SYSMATT-WS2812-MATRIX-CARRIER-32X8: common questions

What microcontroller does the SYSMATT-WS2812-MATRIX-CARRIER-32X8 use?

The SYSMATT-WS2812-MATRIX-CARRIER-32X8 is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the SYSMATT-WS2812-MATRIX-CARRIER-32X8 PCB?

The SYSMATT-WS2812-MATRIX-CARRIER-32X8 measures 321 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SYSMATT-WS2812-MATRIX-CARRIER-32X8?

28 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the SYSMATT-WS2812-MATRIX-CARRIER-32X8 design files?

From the sysmatt/SYSMATT-MATRIX-CARRIER repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SYSMATT-WS2812-MATRIX-CARRIER-32X8 design in my own project?

Yes, under the terms of its GPL-3.0 license, which sysmatt chose for the repository.

Can I test firmware for the SYSMATT-WS2812-MATRIX-CARRIER-32X8 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in SYSMATT-MATRIX-CARRIER

Similar boards