TrailCurrentBtGateway

szf2020·TrailCurrentBtGateway·EDA/trailer-bt-gateway.kicad_pcb

TrailCurrentBtGateway PCB layout, top view — open source ESP32 board by szf2020

About the TrailCurrentBtGateway PCB

TrailCurrentBtGateway is an open source ESP32 PCB design by szf2020, published on GitHub under the MIT license. It is a 2-layer board measuring 48.4 × 46.1 mm, with 14 components from 11 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP63203WU-7 and SN65HVD230. By type, the board carries 6 capacitors, 3 ICs, 2 connectors, 2 resistors and 1 inductor.

It belongs with the iot & wireless, power & battery and sensors designs in this gallery.

From the project

Bluetooth Low Energy gateway that translates remote commands into CAN bus messages

Bluetooth Low Energy (BLE) gateway module that receives commands via Bluetooth and translates them into CAN bus messages for vehicle and trailer control. Part of the TrailCurrent open-source vehicle platform.

- Microcontroller: ESP32 - Function: BLE-to-CAN bus gateway for remote control of trailer devices - Key Features: - BLE with secure bonding (MITM protection) - 8 independent device control channels - CAN bus interface at 500 kbps - Real-time sensor data relay (temperature, solar, battery) - Hierarchical PCB schematic design with FreeCAD enclosure

Main components on the TrailCurrentBtGateway

TrailCurrentBtGateway bill of materials (BOM)

14 components, 11 distinct parts.

QtyPartRefs
1
AP63203WU-7
IC1
1
ESP32-WROOM-32
U1
1
SN65HVD230
U2
1
Conn_01x06
J1
1
Conn_01x04
J2
1
NLV32T-3R9J-EF (3.9uH)
L1
3
22uF
C1, C5, C6
1
0.1uF
C2
1
10uF
C3
1
100nF
C4
2
10k
R1, R4

TrailCurrentBtGateway design files

The KiCad project lives in the szf2020/TrailCurrentBtGateway repository on GitHub; these links point at the commit this page was built from.

TrailCurrentBtGateway: common questions

What microcontroller does the TrailCurrentBtGateway use?

The TrailCurrentBtGateway is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the TrailCurrentBtGateway PCB?

The TrailCurrentBtGateway measures 48.4 × 46.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TrailCurrentBtGateway?

14 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the TrailCurrentBtGateway design files?

From the szf2020/TrailCurrentBtGateway repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TrailCurrentBtGateway design in my own project?

Yes, under the terms of its MIT license, which szf2020 chose for the repository.

Can I test firmware for the TrailCurrentBtGateway without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards