TrailCurrentCanEspNowGateway
szf2020·TrailCurrentCanEspNowGateway·EDA/trailecurrent-can-to-espnow-gateway/trailecurrent-can-to-espnow-gateway.kicad_pcb
About the TrailCurrentCanEspNowGateway PCB
TrailCurrentCanEspNowGateway is an open source ESP32 PCB design by szf2020, published on GitHub under the MIT license. It is a 2-layer board measuring 48.4 × 46.1 mm, with 18 components from 15 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP63203WU-7, SN65HVD230 and ZX-XH2.54-4PWT. By type, the board carries 6 capacitors, 4 ICs, 4 resistors, 3 connectors and 1 inductor.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
From the project
Bidirectional CAN-to-ESP-NOW wireless gateway for relaying sensor data between trailer and vehicle
A wireless relay gateway that bridges CAN bus messages to ESP-NOW protocol for remote vehicle monitoring in tow vehicles. Part of the TrailCurrent open-source vehicle platform.
This project enables wireless relaying of CAN bus messages using the ESP-NOW protocol. The gateway hardware and firmware allow real-time data from a trailer's CAN bus to be transmitted reliably to remote displays and monitoring devices in a vehicle.
Main components on the TrailCurrentCanEspNowGateway
TrailCurrentCanEspNowGateway bill of materials (BOM)
18 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63203WU-7 | AP63203WU7 | IC1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ZX-XH2.54-4PWT | CONN-SMD_4P-P2.50-WAFER-254W-4P | U3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x04 | CAN_PLUS_POWER | J2 |
| 1 | Conn_01x04 | GenericPad_01x04 | J3 |
| 1 | NLV32T-3R9J-EF (3.9uH) | NLV32T-3R9J-EF | L1 |
| 3 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5, C6 |
| 1 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 10uF | C_1206_3216Metric | C3 |
| 1 | 100nF | C_1206_3216Metric | C4 |
| 2 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4 |
| 1 | 2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
TrailCurrentCanEspNowGateway design files
The KiCad project lives in the szf2020/TrailCurrentCanEspNowGateway repository on GitHub; these links point at the commit this page was built from.
TrailCurrentCanEspNowGateway: common questions
What microcontroller does the TrailCurrentCanEspNowGateway use?
The TrailCurrentCanEspNowGateway is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the TrailCurrentCanEspNowGateway PCB?
The TrailCurrentCanEspNowGateway measures 48.4 × 46.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TrailCurrentCanEspNowGateway?
18 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the TrailCurrentCanEspNowGateway design files?
From the szf2020/TrailCurrentCanEspNowGateway repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TrailCurrentCanEspNowGateway design in my own project?
Yes, under the terms of its MIT license, which szf2020 chose for the repository.
Can I test firmware for the TrailCurrentCanEspNowGateway without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k