TrailCurrentShuntGateway
szf2020·TrailCurrentShuntGateway·EDA/trailer-shunt-can-bus.kicad_pcb
About the TrailCurrentShuntGateway PCB
TrailCurrentShuntGateway is an open source ESP32 PCB design by szf2020, published on GitHub under the MIT license. It is a 2-layer board measuring 48.4 × 46.1 mm, with 15 components from 12 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP63203WU-7 and SN65HVD230. By type, the board carries 6 capacitors, 3 ICs, 3 connectors, 2 resistors and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Serial-to-CAN gateway for Victron BMV battery shunt monitoring data
Gateway module that reads battery monitoring data from a Victron BMV battery shunt via serial and transmits the readings over a CAN bus interface. Part of the TrailCurrent open-source vehicle platform.
- Microcontroller: ESP32 - Function: Serial-to-CAN bus bridge for Victron BMV battery shunt data - Key Features: - Victron BMV VE.Direct serial protocol parsing - CAN bus output at 500 kbps - Battery voltage, current, SOC, and wattage reporting - Hierarchical PCB schematic design with FreeCAD enclosure - 8 LED status indicators
Main components on the TrailCurrentShuntGateway
TrailCurrentShuntGateway bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63203WU-7 | AP63203WU7 | IC1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x04 | CAN_PLUS_POWER | J2 |
| 1 | Conn_01x04 | GenericPad_01x04 | J3 |
| 1 | NLV32T-3R9J-EF (3.9uH) | NLV32T-3R9J-EF | L1 |
| 3 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5, C6 |
| 1 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 10uF | C_1206_3216Metric | C3 |
| 1 | 100nF | C_1206_3216Metric | C4 |
| 2 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4 |
TrailCurrentShuntGateway design files
The KiCad project lives in the szf2020/TrailCurrentShuntGateway repository on GitHub; these links point at the commit this page was built from.
TrailCurrentShuntGateway: common questions
What microcontroller does the TrailCurrentShuntGateway use?
The TrailCurrentShuntGateway is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the TrailCurrentShuntGateway PCB?
The TrailCurrentShuntGateway measures 48.4 × 46.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TrailCurrentShuntGateway?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the TrailCurrentShuntGateway design files?
From the szf2020/TrailCurrentShuntGateway repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TrailCurrentShuntGateway design in my own project?
Yes, under the terms of its MIT license, which szf2020 chose for the repository.
Can I test firmware for the TrailCurrentShuntGateway without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k