Mesa-7i96s-P1-Port-BOB
Szymon423·Mesa-7i96s-P1-Port-BOB·01-Hardware/db25-bob-io/db25-bob-io.kicad_pcb
About the Mesa-7i96s-P1-Port-BOB PCB
Mesa-7i96s-P1-Port-BOB is an open source PCB design by Szymon423, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 52.5 × 98 mm, with 104 components from 13 distinct parts.
Other key parts include the CPC1017N, TLP293 and 74HC14. By type, the board carries 34 resistors, 29 diodes, 19 ICs, 12 inductors, 5 connectors and 4 capacitors.
It belongs with the dev boards & breakouts and robotics & motion designs in this gallery.
From the project
Isolated I/O breakout board for the Mesa 7i96S P1 (DB25) port – 12× 24 V opto-isolated inputs, 5× SSR outputs, DIN-rail mount. KiCad 10, LinuxCNC.
This is a breakout board for the P1 (DB25) expansion port of the Mesa 7i96S. It turns the 17 raw 3.3 V GPIO pins of P1 into 12 galvanically isolated 24 V inputs and 5 solid-state relay outputs. The outputs are on pluggable screw terminals, and the board sits on a 3D-printed DIN-rail mount.
- 12 inputs, 24 V, optically isolated. Each input has a TLP293 optocoupler, a 74HC14 Schmitt-trigger buffer, a bidirectional TVS (SMF30CA), a ferrite-bead filter and a status LED. - 5 outputs, solid-state relays. The CPC1017N SSRs give isolated, polarity-free contacts that switch AC or DC. Each output has…

Main components on the Mesa-7i96s-P1-Port-BOB
Mesa-7i96s-P1-Port-BOB bill of materials (BOM)
104 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | CPC1017N | SOP-4_3.8x4.1mm_P2.54mm | U1, U2, U3, U4, U5 |
| 12 | TLP293 | SOIC-4_4.55x2.6mm_P1.27mm | U6, U7, U8, U9, U10, U12, U13, U14 +4 |
| 2 | 74HC14 | SO-14_3.9x8.65mm_P1.27mm | U11, U18 |
| 4 | OQ0612500000G | PhoenixContact_MCV_1,5_6-G-3.5_1x06_P3.50mm_Vertical | J3, J4, J5, J6 |
| 1 | Conn_02x13_Odd_Even | IDC-Header_2x13_P2.54mm_Vertical | J7 |
| 1 | 100mA | Fuse_1206_3216Metric | F1 |
| 12 | SMF30CA | D_SOD-123F | D13, D14, D15, D19, D20, D21, D25, D26 +4 |
| 17 | LED | LED_0603_1608Metric | D16, D17, D18, D22, D23, D24, D28, D29 +9 |
| 12 | FerriteBead | L_0603_1608Metric | FB7, FB8, FB9, FB10, FB11, FB12, FB13, FB14 +4 |
| 2 | 100n | C_0603_1608Metric | C3, C5 |
| 2 | 1u | C_0603_1608Metric | C4, C6 |
| 10 | 1k | R_0603_1608Metric | R1, R2, R3, R4, R5, R37, R38, R39 +2 |
| 24 | 4.7k | R_0805_2012Metric | R13, R14, R15, R16, R17, R18, R19, R20 +16 |
Mesa-7i96s-P1-Port-BOB design files
The KiCad project lives in the Szymon423/Mesa-7i96s-P1-Port-BOB repository on GitHub; these links point at the commit this page was built from.
Mesa-7i96s-P1-Port-BOB: common questions
How big is the Mesa-7i96s-P1-Port-BOB PCB?
The Mesa-7i96s-P1-Port-BOB measures 52.5 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mesa-7i96s-P1-Port-BOB?
104 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mesa-7i96s-P1-Port-BOB design files?
From the Szymon423/Mesa-7i96s-P1-Port-BOB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mesa-7i96s-P1-Port-BOB design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which Szymon423 chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k