HardLabs

Voron badge

tanaes·whopping_Voron_mods·badge/voron_badge/voron_badge.kicad_pcb

Voron badge PCB layout, top view — open source RP2040/RP2350 board by tanaes

About the Voron badge PCB

Voron badge is an open source RP2040/RP2350 PCB design by tanaes, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90 × 135 mm, with 84 components from 32 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the 74LVC1G17, IP3005A and IP5306. By type, the board carries 23 resistors, 22 capacitors, 18 diodes, 7 jumpers, 5 connectors and 4 ICs.

It belongs with the wearables designs in this gallery.

Main components on the Voron badge

74LVC1G17RP2040IP3005AIP5306

Voron badge bill of materials (BOM)

84 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74LVC1G17
U1
1
RP2040
U2
1
IP3005A
U3
1
IP5306
U4
1
MMBT5401
Q1
1
PH4
CN1
1
C404964
USB_A
J1
1
CONN_01X02
Conn_01x02
J2
1
CONN_02X07_COUNTER_CLOCKWISE
Conn_02x07_Counter_Clockwise
J3
1
CONN_02X07_COUNTER_CLOCKWISE
Conn_02x07_Counter_Clockwise
J4
1
C2757931
2A
F1
7
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP1, JP2, JP3, JP4, JP5, JP6, JP7
2
SW_Push
SW1, SW2
1
D_Schottky
D1
12
SK6812MINI-E
D2, D3, D4, D5, D6, D7, D8, D9 +4
4
LED_W
D14, D15, D16, D17
1
LED_R
D18
1
1UH
1uH
L1
12
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +4
1
4.7U
4.7u
C13
Show 12 more
QtyPartRefs
2
10U
10u
C14, C15
1
2.2U
2.2u
C16
6
22U
22u
C17, C18, C19, C20, C21, C22
3
1M
R1, R6, R7
3
10K
10k
R2, R3, R17
2
43K
43k
R4, R20
3
51K
51k
R5, R21, R24
5
1k
R8, R13, R14, R16, R22
1
100R
R10
4
C22936
1R
R11, R12, R18, R19
1
100K
100k
R15
1
75K
75k
R23

Voron badge design files

The KiCad project lives in the tanaes/whopping_Voron_mods repository on GitHub; these links point at the commit this page was built from.

Voron badge: common questions

What microcontroller does the Voron badge use?

The Voron badge is built around the RP2040, from the RP2040/RP2350 family.

How big is the Voron badge PCB?

The Voron badge measures 90 × 135 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Voron badge?

84 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Voron badge design files?

From the tanaes/whopping_Voron_mods repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Voron badge design in my own project?

Yes, under the terms of its GPL-3.0 license, which tanaes chose for the repository.

Can I test firmware for the Voron badge without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in whopping_Voron_mods

Similar boards