Taranium-RP2040

Taran-the-Idiot·Taranium-RP2040·PCB/PCB.kicad_pcb

Taranium-RP2040 PCB layout, top view — open source RP2040/RP2350 board by Taran-the-Idiot

About the Taranium-RP2040 PCB

Taranium-RP2040 is an open source RP2040/RP2350 PCB design by Taran-the-Idiot, published on GitHub under the MIT license. It is a 2-layer board measuring 39.1 × 26.9 mm, with 39 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700, W25Q128JVS and USBLC6-2SC6. By type, the board carries 16 capacitors, 9 resistors, 5 connectors, 4 ICs, 2 diodes and 1 crystal.

From the project

An RP2040 devboard that is made to be compact and have its pins horizontally rather than vertically so it can have better packaging for my projects. Specifically this was made for my driving macropad because the original microcontroller I was using did not have enough pins and al

An RP2040 devboard that is made to be compact and have its pins horizontally rather than vertically so it can have better packaging for my projects. Specifically this was made for my driving macropad because the original microcontroller I was using did not have enough pins and all the alternatives took up a large amount of vertical space and would not package well

Taranium-RP2040, from the project README
From the project README

Main components on the Taranium-RP2040

Taranium-RP2040 bill of materials (BOM)

39 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
MCP1700
U2
1
W25Q128JVS
U3
1
USBLC6-2SC6
U4
1
12MHZ
12MHz
Y1
2
CONN_01X08_PIN
Conn_01x08_Pin
J1, J2
1
CONN_01X06_PIN
Conn_01x06_Pin
J3
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J4
1
CONN_01X03_PIN
Conn_01x03_Pin
J5
1
BOOT
BOOT1
1
RESET
RESET1
1
C48192
D1
1
LED
D2
2
1UF
1uf
C1, C8
10
0.1UF
0.1uf
C2, C3, C4, C5, C6, C7, C9, C10 +2
2
10UF
10uf
C11, C12
2
15PF
15pf
C13, C14
2
27
R1, R2
2
10K
10k
R3, R9
1
2.2K
2.2k
R4
Show 2 more
QtyPartRefs
2
5.1K
5.1k
R5, R6
2
1k
R7, R8

Taranium-RP2040 design files

The KiCad project lives in the Taran-the-Idiot/Taranium-RP2040 repository on GitHub; these links point at the commit this page was built from.

Taranium-RP2040: common questions

What microcontroller does the Taranium-RP2040 use?

The Taranium-RP2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Taranium-RP2040 PCB?

The Taranium-RP2040 measures 39.1 × 26.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Taranium-RP2040?

39 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Taranium-RP2040 design files?

From the Taran-the-Idiot/Taranium-RP2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Taranium-RP2040 design in my own project?

Yes, under the terms of its MIT license, which Taran-the-Idiot chose for the repository.

Can I test firmware for the Taranium-RP2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards