Tarpn battery backup deluxe

tarpn·tarpn-battery-backup-deluxe·kicad/rev3/TARPN Power Board rev3.kicad_pcb

Tarpn battery backup deluxe PCB layout, top view — open source AVR/Arduino board by tarpn

About the Tarpn battery backup deluxe PCB

Tarpn battery backup deluxe is an open source AVR/Arduino PCB design by tarpn, published on GitHub. It is a 2-layer board measuring 127 × 76.2 mm, with 85 components from 51 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the TL431LP, L7805 and LM358. By type, the board carries 29 resistors, 15 connectors, 12 capacitors, 7 transistors, 7 diodes and 5 ICs.

It belongs with the power & battery, rf & radio and displays & leds designs in this gallery.

From the project

Battery backup system for TARPN

An open source DC-DC Uninterrupted Power Supply for TARPN.

Battery Backup Deluxe (BBD) is a system that monitors and switches DC power between a power supply and a battery. It is a bespoke power management solution for multi-port packet radio nodes in the TARPN project. It is also generally useful for any 12V systems including non-TARPN Amateur Radio activities.

Tarpn battery backup deluxe, from the project README
From the project README

Main components on the Tarpn battery backup deluxe

Tarpn battery backup deluxe bill of materials (BOM)

85 components, 51 distinct parts.

QtyPartRefs
2
TL431LP
U1, U5
1
L7805
U2
1
ATmega328P-P
U3
1
LM358
U4
4
IRF4905
Q1, Q2, Q5, Q6
1
IRF9Z24
Q3
2
2N700X
Q4, Q7
1
Crystal
Y1
1
Load +
J1
1
Load -
J2
1
Supply +
J3
1
Supply -
J4
1
BATT +
J5
1
BATT -
J6
3
Conn_01x04
J7, J11, J12
1
RPI Conn
J8
1
ICSP
J9
1
Conn_01x04
J10
1
Conn_01x02
J13
1
Control Board
J14
Show 31 more
QtyPartRefs
1
Power Board
J15
1
Fuse
F1
1
Polyfuse_Small
F2
1
Reset
SW1
1
RotaryEncoder_Switch
SW2
1
10k Thermistor NTC
TH1
4
TestPoint_Small
TP3, TP4, TP5, TP6
1
12V
D2
1
5V
D4
1
RPI
D5
1
Battery
D6
1
5.1V Zener
D8
1
Status
D9
1
1N4001
D10
2
C_Polarized
C1, C2
7
0.1µF
C3, C6, C8, C9, C11, C12, C13
2
22pF
C4, C5
1
0.22µF
C7
3
49.9kΩ
R1, R6, R8
8
10kΩ
R2, R4, R9, R11, R16, R22, R23, R25
1
3mΩ
R3
2
249Ω
R5, R10
3
1kΩ
R7, R17, R20
3
2.2kΩ
R12, R13, R14
2
200Ω
R15, R24
1
100Ω
R18
1
500
R19
1
10k
R21
1
1k
R26
1
10k
RN2
2
10k
RN3, RN4

Tarpn battery backup deluxe design files

The KiCad project lives in the tarpn/tarpn-battery-backup-deluxe repository on GitHub; these links point at the commit this page was built from.

Tarpn battery backup deluxe: common questions

What microcontroller does the Tarpn battery backup deluxe use?

The Tarpn battery backup deluxe is built around the ATmega328P-P, from the AVR/Arduino family.

How big is the Tarpn battery backup deluxe PCB?

The Tarpn battery backup deluxe measures 127 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tarpn battery backup deluxe?

85 components, from 51 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tarpn battery backup deluxe design files?

From the tarpn/tarpn-battery-backup-deluxe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tarpn battery backup deluxe design in my own project?

The repository has no license, so all rights stay with tarpn. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tarpn battery backup deluxe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards