Stillpoint

techmiguel·stillpoint·hardware/stillpoint.kicad_pcb

Stillpoint PCB layout, top view — open source Silicon Labs board by techmiguel

About the Stillpoint PCB

Stillpoint is an open source Silicon Labs PCB design by techmiguel, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 60 × 60 mm, with 74 components from 30 distinct parts.

Its main chip is the MGM260PB32VNA5, from the Silicon Labs family. Other key parts include the BGT60TR13CE6327XUMA1, TLV75733PDRVR, TPS7A2018PDBVR, CP2102N-A02-GQFN24R and USBLC6-2SC6. By type, the board carries 38 capacitors, 14 resistors, 8 ICs, 8 inductors, 2 switches and 1 crystal.

It belongs with the iot & wireless, sensors and rf & radio designs in this gallery.

From the project

Open-hardware 60 GHz radar ceiling sensor: presence & fall detection without a camera. Matter over Thread, KiCad 4-layer Ø60 mm board.

- Sees the room, never the person. No camera, no microphone. A 60 GHz FMCW radar (Infineon BGT60TR13C) measures where people are and how they move. - Finds people who are perfectly still, by the movement of their chest as they breathe, so someone sitting or lying quietly does not "disappear". - Counts people, tracks position and posture, and reports falls, all from one stream: no modes to switch between. - Runs entirely on the device (Silicon Labs MGM260P / EFR32MG26) and reports over Matter on Thread with standard clusters: no cloud, no account, works with Home Assistant. - Open hardware…

Stillpoint, from the project README
From the project README

Main components on the Stillpoint

Stillpoint bill of materials (BOM)

74 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BGT60TR13CE6327XUMA1
BGT60TR13C
Infineon
U1
1
MGM260PB32VNA5
Silicon Labs
U2
1
TLV75733PDRVR
Texas Instruments
U3
1
TPS7A2018PDBVR
Texas Instruments
U4
1
CP2102N-A02-GQFN24R
Silicon Labs
U5
1
USBLC6-2SC6
STMicroelectronics
U6
2
SN74AVC4T245PWR
Texas Instruments
U7, U8
1
KC2016K80.0000C1GE00
Kyocera AVX
Y1
1
GT-USB-7051A
G-Switch
J1
1
SMD1206P075TFT
0.75A
PTTC
F1
1
TL3342F160QG
SETUP
E-Switch
SW1
1
TL3342F160QG
RESET
E-Switch
SW2
1
SZYY1615RGB-B
Yongyu Photoelectric
D1
8
BLM18KG601SN1D
Murata
FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8
1
CL21A475KAQNNNE
4.7u
Samsung
C1
9
CL21A106KAYNNNE
10u
Samsung
C2, C4, C22, C27, C28, C29, C30, C32 +1
10
CL05A105KA5NQNC
1u
Samsung
C3, C8, C12, C14, C31, C33, C35, C36 +2
15
CL05B104KO5NNNC
100n
Samsung
C5, C6, C7, C9, C10, C11, C13, C15 +7
1
CC0402KRX5R7BB474
470n
YAGEO
C16
1
CL05B103KB5NNNC
10n
Samsung
C17
Show 10 more
QtyPartRefs
1
CC0402MRX5R6BB475
4.7u
YAGEO
C25
2
0402WGF5101TCE
5.1k
UNI-ROYAL
R1, R2
4
0402WGF1003TCE
100k
UNI-ROYAL
R3, R14, R15, R16
1
0402WGF1500TCE
150
UNI-ROYAL
R4
1
0402WGF2212TCE
22.1k
UNI-ROYAL
R7
1
0402WGF4752TCE
47.5k
UNI-ROYAL
R8
2
0402WGF1001TCE
1k
UNI-ROYAL
R9, R11
1
0402WGF7500TCE
750
UNI-ROYAL
R10
1
0402WGF3300TCE
330
UNI-ROYAL
R12
1
0402WGF1002TCE
10k
UNI-ROYAL
R13

Stillpoint design files

The KiCad project lives in the techmiguel/stillpoint repository on GitHub; these links point at the commit this page was built from.

Stillpoint: common questions

What microcontroller does the Stillpoint use?

The Stillpoint is built around the MGM260PB32VNA5, from the Silicon Labs family.

How big is the Stillpoint PCB?

The Stillpoint measures 60 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Stillpoint?

74 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stillpoint design files?

From the techmiguel/stillpoint repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stillpoint design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which techmiguel chose for the repository.

Can I test firmware for the Stillpoint without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.

Similar boards