10 open source boards using the TLV75733PDRVR

Real designs built with the TLV75733PDRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TLV75733PDRVR

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TLV75733PDRVR connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_2 pin is left unconnected on 10 of 10 designs.
  • The NC_5 pin is left unconnected on 10 of 10 designs.
  • The OUT_1 pin is tied to 3.3V on 8 of 10 designs (a signal on 2).
  • The EN_4 pin is tied to 5V on 8 of 10 designs (a signal on 2).
OUT_1pin 1Connected to: 3.3V 80% · a signal 20%
NC_2pin 2Connected to: Not connected 100%
GND_3pin 3Connected to: GND 100%
EN_4pin 4Connected to: 5V 80% · a signal 20%
NC_5pin 5Connected to: Not connected 100%
IN_6pin 6Connected to: 5V 80% · a signal 20%
EP_7pin 7Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ninepin ux by jusii, AllWizeK2-hardware by AllWize, ChariotFC by Rispats and Stillpoint by techmiguel.

The TLV75733PDRVR in open source designs

The gallery holds 10 open source boards using the TLV75733PDRVR from 10 GitHub repositories; a typical one measures about 73.8 × 61 mm and carries around 87 components.

80% use four copper layers or more, and 40% carry an open source license.

The most starred is Ninepin ux by jusii.

Microcontrollers on boards using the TLV75733PDRVR

TLV75733PDRVR: common questions

Where can I find a TLV75733PDRVR reference design?

Each of the 10 boards on this page is a real design using the TLV75733PDRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75733PDRVR NC_2 pin connected?

The NC_2 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the TLV75733PDRVR.

How is the TLV75733PDRVR NC_5 pin connected?

The NC_5 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the TLV75733PDRVR.

How is the TLV75733PDRVR OUT_1 pin connected?

The OUT_1 pin is tied to 3.3V on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the TLV75733PDRVR.

What parts are used alongside the TLV75733PDRVR?

The USBLC6-2SC6, BQ27441DRZT-G1A, ER-TFT023-1, ESP32-PICO-D4 and FT231XQ-R appear in the most repositories here.

Which microcontrollers do boards using the TLV75733PDRVR use?

Most are built on RP2040/RP2350 (4), ESP32 (1), Microchip SAM (1) and Silicon Labs (1).

How big is a typical board using the TLV75733PDRVR?

The median is 73.8 × 61 mm, and 20% are two-layer designs.

What is the most popular open source board using the TLV75733PDRVR?

By GitHub stars, Ninepin ux by jusii, with 2 stars.

Can I simulate one of these boards using the TLV75733PDRVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part